Oval Gear Flowmeter (CX-OGFM)

Oval Gear Flowmeter (CX-OGFM)
A.[Features ofOval Gear Flow Meter]
1-Widely range of liquid viscosity
the viscosity of medium is 0.6Mpa.s~250Mpa.s
2-Various of Display and Output
The Cast iron material PD Mechanical Oval Gear Flow Meter with digital display and mechanical display ;pulse or 4~20mA Output;
3-Various applications
the Cast iron material PD Mechanical Oval Gear Flow Meter suitabke for various applications such as chemical industry ,oil,medicine and electricity,etc.
4-High accuracy
Beacuse of the principle of Cast iron material PD Mechanical Oval Gear Flow Meter,the accuracy is 0.5% or 0.2%.
B.[Parameters]Production NameCast iron material PD Mechanical Oval Gear Flow MeterMediumMain Medium is OilAccuracy0.5% or 0.2%OutputPulse output ,4~20mA Output and without outputMaterialCast iron,cast steel or stainless steel materialDisplayLCD Display or Local Mechanical displayFunctionReturn to zero functionAccessories''Y''Filter orsquare filterTemperature-20~100ºCViscosity0.6Mpa.s~250Mpa.s
Model
Connection
Flowrate(L/H)
0.6~2map.s
2~8map.s
8~200map.s
DT-O-10
1/2"~3/8"
40~400
40~400
40~400
DT-O-15
Flange4*Φ14
380~1500
200~1500
150~1500
DT-O-20
Flange4*Φ14
750~3000
400~3000
300~3000
DT-O-25
Flange4*Φ14
1500~6000
800~6000
600~6000
DT-O-40
Flange4*Φ18
3000~15000
2000~15000
1500~15000
DT-O-50
Flange4*Φ18
4800~24000
3200~24000
2400~24000
DT-O-80
Flange4*Φ18
12000~60000
8000~60000
6000~60000
DT-O-100
Flange4*Φ18
20000~100000
13000~100000
10000~100000
DT-O-150
Flange4*Φ18
24000~120000
15000~120000
12000~120000
C.[Installation]The flow direction should be same as the sign on the body,the location must beconvenient for you reading.The Cast iron material PD Mechanical Oval Gear Flow Meter should be installed at normal temperature location where withoutharmful gas to avoiddamaging the flow meter;Pls installa thebear horizontal statePls keep the pipeline is clear before installa the flow meter and installa the filter to avoid theImpurities got into pipe.The flow adjusted value should be installed at downsteam,First,you should open the adjusted value and second to open theshut-off value.Pls ensure the liquid without any gas;If the mediun's viscosity is high,sometime ,you shouldheating to reduce the viscosity;
D[Company info]Our Company isTop 10Manufacture on Alibaba;We have about 30 years of experience in Manufacture;Our products have been exported to more 100 coutries and area;ISO,SGS,CE and more ceterficates for you reference;Patent technology and more than 3 years working life