Overhead Crane C-Rail Track Flat Cable Festoon System

Overhead Crane C-rail Track Flat Cable Festoon SystemIn thesecable festooned systemseach cable trolley has four rollers, which run inside a C-rail (profile rail). Therefore, this system runs in a very robust manner and at the same time, can be used for various applications. For instance on indoor cranes, in workshops or in outdoor areas, to implement a flexible transmission of current and compressed air or media.The C-rails are attached to the ceiling or the walls; this, a firmly assembled, fixed system is created. However, in addition to the straight running tracks, we can also manufacture curved pieces for the C-rails, specifically for your requirements.Standard dimensions and curved pieces
We offer C-rails in standard lengths of 4m or 6 m, however, they can be extended to any lengths using track connectors. Should you require shorter rail pieces, we can cut the rails to measure (merely costs for each started metre accrue).Area of application C-rails:
Transport of hoses, flat and round cables
Carrying capacity of the trolleys: max. of 35 kg
Speeds up to 60 m/min
Curved tracks are only possible with this system!
Areas of application of cable festoon system
Cranes, hoisting devices
Conveyors, environmental engineering
Special engineering
Workshop equipmentSpecifications:
1. Conductor rail material: Cold rolled steel sheet, stainless steel sheet.
2. Environmental temperature:-35°C-90°C
3. Carrying trolley speed: <120m/m
4. Carrying trolley running life: 32000 hTechnical parameters

S/NTypeModelNo.CrossSectionABCD1HXDL-3068DL3033401422HXDL-4068DL404040142.53HXDL-5068DL505050162.54HXDL-6068DL606363184.55HXDL-7068DL707268224.56HXDL-10068DL100100100355Remark:Thestandardlengthis4mor6m
Components:1. Bracket
2. Top supporting
3. C rail
4. Towing arm
5. Coupling
6. Trolley
7. End device
8. Suction hole
9. Rubber insert
10. Flat cable
Trolley design:
Flat cable trolleys with support diameters of 50 to 400 mm. Round cable trolleys with u-bolt or ball joint for cable clips. Special designs for special applications. Ideal control unit trolley.Load capacity: Up to 125 kg
Max. System length: 150 mTrack Configuration:
Straight, only partially for curved tracks.Application
Order notice:1. Track length:____meter
2. Cable length:____meter
3. Quantity of trolley:____pcs (2m ~ 4m with a trolley)
4. Quantity of coupling joints:___pcs (A joint is required when the guide rail is longer than 4m or 6m)
5. Others parts will be list in our quotation.