P8 Series Foundation Pile Dynamic Tester Equipment

Introduction of P8 Series Foundation Pile Dynamic Tester Equipment
P8 Series Foundation Pile Dynamic Tester Equipment by using the reflected wave method, the apparatus is used to assess the integrality of concrete pile and identify the extent and location of the pile defect. It can be used for testing perfusion pile and hammer pile. It can also be used for testing the exposed top surface of constructions such as pillars.
Hammer instrument: Use different types of hammer (different energy/material) for different types of piles (lengths, etc. )Features ofP8 Series Foundation Pile Dynamic Tester Equipment
1. Large touch screen, user friendly interface, easy to learn and master.
2. Dual-channel simultaneous sampling, multi-directional testing for each pile makes the work more efficiently.
3. Wavelet processing can effectively collect reflecting signal from pile bottom, exceeds international standards.
4. The systems advanced design accurately stores the wave form image, and multiple channel signals can be saved for each tested pile.
5. Real time on-site test wave can be treated with smoothing, differential, filtering, power exponent and linear amplification wave processing methods.
6. The signal noise can be eliminated by taking the superposition of multiple signals. The superposition can be viewed at any time, allowing the poorer quality signals to be ignored.
7. Files arranged by projects ® Piles; Clear and convenient, project/pile testing data can be easily accessed, edited, or deleted
8. Standard USB port, thumb drive can be used for updating software; Convenient and reliable.
9. Professional Windows OS-based analysis software is fully featured, encompassing a very user friendly interface, allows the production of detailed test reports. Print settings are flexible, print preview and print processed result. Comprehensive help system can guide users when necessary, and it also including related testing rules.
10. Professional Windows OS-based analysis software is fully featured, includes user friendly interfaces, and may be used to produce detailed test reports. Print settings are flexible, print preview and print processed result. Comprehensive help system can guide users when necessary, and it also including related testing rules.
11. Windows-platform reflected-wave analysis software
12. This software is used to process and analyze data produced by the ZBL-P8 series Foundation Pile Dynamic Tester.Parameter ofP8 Series Foundation Pile Dynamic Tester EquipmentItemSpecificationsItemSpecificationsControl ModeEmbedded platform, WinCE Operation SystemMonitor8.4 inch/high brightness/TFT Color LCDData storage2GB, SD cardOperation ModeTouch screenTriggerSignal triggerPortsUSB portNoise voltage of the system≤ 2 mVDynamic range³ 184 dBAmplifier frequency range1Hz to 10kHzInput impedance³ 1 MWSampling time intervals6µ s to 64msTime resolution6µ sMax length of sampling³ 1024Gain error≤ 1 dBAmplitude nonlinear degree≤ 10%Timing accuracy≤ 1%Floating point magnification (time)1 to 256Sentinel magnify (time)1 to 1, 000, adjustableA/D resolution16 bit A/D, 8 bit floating pointMax magnify (times)256000Number of channels2Transducer sensitivity³ 100 mv/g(acceleration mode)Consistency of phase position of two channels± 3° or 0.05msFrequency range of Transducer0.5~9000 Hz(acceleration mode)Amplitude consistency of two channels≤ 3% or ≤ ± 0.2dBContinuous operating hours> 5 hrsInterference between channels≤ 1%PowerAC: 220V± 10%, DC: +12VDimensions256mm´ 188mm´ 63.5mmWeight2.3kg(lithium battery included)