PA5500 5channel 500W/100V/Channel PA Amplifier Array

PA5500 5channel 500W/100V/channel 5unit in one case, mono amp every unit

FEATURES:

1.500W constant voltage amp, RMS power, transformerless output

2.24hourscontinuous running design, high stability

3.220V or 110V 50Hz or 60Hz ac supply selected

4.All aluminum case, good look high heat dissipation performance.

5.Power on auto diagnostic function, full protection inside.

6.4u panel height ,148mm body height ,360mm body length, 400mm total length.

7.RS485 remote control and status reply.

8.Auto temperature control system, fan speed and amp gain changed when high temperature.

9. power level auto control system, delivery out power auto limited.

10.Class D Balance To Balance technology supported, high switching frequency, lower EMI, better amplified signal output.

11.monitor speaker inside, monitor the output level and input signal

12.low pass filers and high cut filters inside, suit for broadcast application.

Specifications:

Power Source

110Vac or 220Vac 50Hz/60Hz

Diagram

Balance To BalanceClass D

Input

5 channel

Rca unbalance input1.0Vrms

Phoniex balance input 0.775Vrms

Rated Power

5channel 500W/20Ω,100Vrms output

Frequency Response

75Hz-15KHz+1dB/-1dB(activefilter available)

THD

0.5% at rated power

Protection

OCP/OVP/UVP/DCP/OTP,thermalauto gain control, over current auto gain control

S/N

100dB

Control

RS485 control and status reply, amplifier stage on/off control, amplifier status reply on RS485

LED Indictor

Amplifierready(GREEN)

Overtemperature(RED),auto diagnostic ok(GREEN)

Input signal level(GREEN/YELLOW/RED)

Monitor

2cm 8Ωspeaker,panelmonitorvolumeadjust

MainVolume

Panelmain volume adjust

Cooling

Aluminumcase cooling and auto fan cooling

Operating Temperature

-10 to +40ºC

Dimensions

400mm(Length)X471mm(Width)X178mm(height)

Weight

22.5Kg