PCB High Speed and Precision Desktop SMT Pick and Place Machine Zb3245t

We are SMT Full solution and all kinds of SMT/THT machine Factoy.
Product Introduction:
ZHENGBANG series placement machine main features:small volume,easy operate,run stable and price affordable.They can mount 0402,0603,0805,1206,1210,3528,5050,SOP and QFN ect chips precise.These machines can help to avoid the unstable performance beacuse of manual mounting and reduce the rent cost,improve the product capacity at the same time.
Model No.: ZB3245T
Full soultion video: https:https://www.youtube.com/watch?v=2LzGTp1cCvIDesktop mounting machine/pick and place chip mounter with independent feeders makes custom circuit boards on the cheap autocorrection pick and place machineSpecification:3245tSystemItemsContentMountingSystemMountingnumbers2 piecesMountingprecision0.025mmMountingangle0~360°Theoreticalspeed6500pcs/hourNormalSMT5000pcs/hourNozzletypeJuki series nozzleElementformountingRC(0402,0603,0805,1206,etc)LEDlamp(0603,0805,3014,5050,etc)Chip(SOT,SOP,QFN,BGA,etc)PCBPCB minimumsize10x10mmPCBmaximumsize350x450mmPCB thickness≤2mmPCBwarpingallowedvalue<1mmFeeder tank8mm20pcs12mm4pcs16mm2pcs24mm1pcsPerposition IC material level8pcsTubular materials feederZhengBang dedicated Five tubular materials feeder one(optional)X,Y,ZaxisX,Yaxismovingrange410x490mmZaxismovingrange10mmZaxisrotationangle0~360°ControlSystemOperationalsoftwareIndependentresearchanddevelopmentCompatiblefileformatCSV,TXT.formatfileProgrammingmodeResearching and development independentlyBasicParameterAir pressure0.4Mpa(THE BUILT-IN PUMP)Vacuity degree92kpastorage8G(kingston SD card)power150Wpower supplyAC220VMain engine outline sizeL800*W780*H380MMMaterials feeder outline sizeL235*W700*H245MMNet weight56KGGross weight83KGoutline package size1160*845*532mm
Notes
1.Machines need keeping away from the humid environment and dust, or which will get on electrical shock and fire.
2.Machines need lying stable platform, or which the shake may lead to reduce the precision and even turn over and personal injury.
3.Don't dismounting the machines casually, or the machine may be broken.
4.Don't touch the optical axis and the mounting head, or which may damage the machine and hurt yourselves.
5.Make sure the machine engine accordance with the requirements of the standard machine and make sure lie on the ground very well.
6.Make sure the machine away from the inflammables and explosives to avoid the fire and getting the electric shock.
7.Take the small machine parts like suction nozzle at the place where the babies can't touch.
8.Don't take the pulling needle stretch out for too long time, or the pulling needle will be broken
9.Don't take the machine in the Sun or the highlight directly, or which will reduce the machine precision and even broke the machine.
10.Please kindly contact us if any other questions.
1. the Made In Japan precision Feeder and linearity rail, To ensure the printing of scraper more stable
2. the printing pressure of double scraper separately by the cylinder and the precision throttling valve set up the speed of scraper and avoid resonance.
3. the printing block is lift upward for 45 degrees and fixed , while it is good to hand the scraper and clean the screen.
4. the printing block can move forward to match the screen pattern of fixed position, it is in order to get a better printing effect .
5. the position of printing and double scraper position can be adjusted free by the nut .
5. the clearance level of the printing plate and the steel plate can be adjusted the Precision Trimmer Lever scale and display the scale with digital.
6.. the arm of equipment can be adjusted respectively , suitable for different size 370-650cm.
7. the combination printing plate has the grooves and localization of PIN, it is simple seted and dressed up rapidly, it is also suitable for single-sided and double-sided substrate to produce.
8. accurate floating printing table with X, Y, Z micro-adjustable system.
9. English/Chinese touch screen control with user-friendly easy to learn and operate.
Question
1): What's the way of shipping?
Answer: These are all heavy machines; we suggest you use cargo ship. But components for mending the machines, air transportation would be fine.
2): How is the training?
After buying our machines, your engineers can go to our company or our engineers go to your factory if require, and we will train them how to use these machines.
3): Is it hard to use these machines?
Answer: No, not hard at all. For our previous clients, at most 2days is enough to learn to operate the machines.
4): Does your machines have quality certificate?
Answer: All of our machines have passed CE certificate, ISO14001(BCC), ISO9001(IQNET) and have own patent.
1.Shipment:DHL/TT, By air, by sea (as custom require),shipping tracking.
2.Trainig customers at our factory after buying.
3.Training customers at their factory if required.
4.Provide in-time and effective after-sales service.
5.24 hours online service:
Contact Us
Wenzhou Zhengbang Electronic Equipment Co.,Ltd
No.19 Fengfang Road, Ouhai Economic Development Zone, Wenzhou, ZhejiangSales manager:Chris
WECHAT/SKYPE:86-15267756677