Polyethylene Anti-corrosion Tapes (T 100)
I Description:
The T100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine
IIStructure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
III Features
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold appliedIVTechnical datas:
INNER WRAP TAPE: XUNDA-T 100 Series
Type T-150T-165T-180Total thickness0.51 mm0.65 mm0.80 mmPolyethylene Film0.31 mm0.34 mm0.39 mmSynthetic Adhesive0.20 mm0.31 mm0.41 mmElongation at Break³ 400%Tensile Strength60 N/cm61.2 N/cm63 N/cmYield Strength35.5 N/cm42.3 N/cm45.5 N/cmPeel Adhesion to Primed Pipe21.2 N/cm26.5 N/cm33.2 N/cmDielectric Strength35 KV/mm45.8 KV/mm48 KV/mmCathodic Disbandment0.24 in radius 6.4 mmVolume Resistivity2.5 x 1012 ohm.mWater Vapor Transmission Rate£ 0.1gm/M2/24hWater Absorption Rate< 0.06%Recommended Application Temperature-5 to +60ºCMax Serve Temperature-40 to + 80ºCColorBlackAvailable Roll Size (width x length)2" to 9" X 50 to800 feet