PV Module Components 1000V/ 1500V DC Fuse Block with Fuse

PV Module Components 1000V/ 1500V DC Fuse Block with Fuse
PV DC PVH-30 Fuse Holder was designed and manufactured , complying with the standard IEC60947-3. The Rated Current up to 30A,rated voltage up to 1000V DC. It applied for PV DC combiner box, inverter etc, with the main function of over-current protection and effective disconnection.
PV DC PVH-30 Fuse HolderPole1PAccording toIEC 60947-3Electrical CharacteristicsRated Working VoltageUe1000V DCRated CurrentIn30 ABreaking Capacity20KAMax Power Dissipation3WContol and IndicationOperating State/Fault IndicationIndicator Light OFF/Indicator Light ONConnection and InstallationWire2.5mm2~25Terminal ScrewsM5TorqueNm2.5Degree of ProtectionIP20Installation EnvironmentFuse Size10x38 mmOperating Temperature RangeTU-30ºC~+70ºCFor Mounting OnTH35-7.5/DIN35Pollution Degree3Relative Humidity+20 ºC≤ 95%,+40ºC≤50%Weight0.07kg Per poleInstallation ClassIII
1. Application:
BZCF series of fuses for rated DC voltage to 1500V, the c oiurated current to 30A of the line, and the photovoltaic panels and batteries in series in parallel, the charge converter system to do short-circuit break protection; the same time, Variable rectifier system and short circuit fault breaking protection; and do photovoltaic power generation system inrush current and short circuit fault over-voltage fast breaking protection, rated breaking capacity of 20KA, and Division I is now doing the relevant test, once again enhance the product breaking capacity, Comply with the relevant standards IEC60269, GB13539, UL42428 requirements.
2. Normal working conditions:
The ambient air temperature limit of not more than 90 ºC; the ambient air temperature lower limit of not less than -50 ºC; installation site altitude of not more than 2000m (if more than 2000m, need to specify the requirements, the company can be designed and developed in accordance with customer requirements).
3. Use category
"gPV" indicates a DC fuse for full range breaking capability for over-current protection of solar PV systems.
4. Structural features
This product is made of 99.99% pure silver piece made of variable cross-section melt encapsulated in 95% AL2O3 high strength porcelain made of molten pipe, the melting tube filled with chemically treated high purity quartz sand and special treatment of chemical materials as off Arc medium, the contact surface with silver processing, the two ends of the melt using spot welding and contact firmly connected.1500VDCfuse holder with fuse