PVC Pipes and Electrical Wire Duct and Casing Making/Extrusion/Production Machine

PVC pipes and electrical wire duct and casing making/extrusion/production machine
PVC window profile Product discription
Application : YF series production line is designed for extrusion of PVC plastic window and door's and cross-section cable
pipes,aluminum-plastic composite profiles and etc.PVC profiles are widely used in the building industry,home and officedecoration.
Properties and advantages: This line features stable Plasticization, high output,low sheering force,long life service andother advantages. The production line consists of control system, conical twin screw extruder or parallel twin screwextruder,extrusion die, calibration unit,haul off unit, film covering machine and stacker. The extruder is equipped withalternating-current inverter (ABB or Eurotherm drive), imported temperature controller (RKC,Japan). The calibration unit's pumpand haul off unit's reducer are famous brand products. After simple changing of the die and screw, it also can produce the foamprofiles.PVC window profile Product discription
Product Description

Main Technical Parameter:

Production Width(mm)180300/400600Extruder TypeSJZ51/105SJZ65/132SJZ80/156Motor Power(kw)223755TypeYF180YF300/400YF600Max Output(kg/h)80-100150-200350Cooling Water(m³/h)789Compressor Air(m³/min)0.60.60.6Note:The specifications are subject to change without prior notice.

Product Characteristics:

Mainlycontains conical twin-screw extruder, glue extruder, vacuum calibration, hall-off unit, cutter and stacker.Itadoptsintelligentcontrolsystem,highautomaticsystem,withfeatureofstability,easyoperatingandhighefficiency.Bychangingdifferenttypesofmold,itcanproduceallkindsoffastloadingwallboardwithdifferenttypes,sizes,shapes,thickness.Withrichproductionexperience,Jwellcanprovideon-siteinstallationanddebuggingservicesfreely.UsedforproducingWPCdecorationproduct,whichiswidelyusedinhouseandpublicdecorationfield,featuresnon-pollution,highlifetime,heatinsulation,anti-fire,easycleanandmaintanace,easychangeandrecycleable.

Product Accessories:

Extruder

Name:YF300/400 Twin screw extruder

Brand:Jwell

Screw:Jin Hailuo

Type:65/132

Capacity:150-200kg/h

Electrical parts

Power:37kw
Motor:Siemens
Control Panel:Simens PLC
Electrical Spareparts: Schneider

Frequency convertor: ABB

300 Haul-off Unit

Quantity of caterpillar: 2 lines.

Haul-off motor:4KW x 2 sets
imported inverter
Length of haul-off caterpillar: 2400mm;

Effective length ofCaterpillar:2000mm

Rubber block:400x45X35
Effective width of caterpillar: 400mm x 2
Haul-off speed:0.5~2.0 m/min

YFD300 Vacuum calibration table

Calibration tanks and basin are made of stainless steel
Table length: 6000mm.
Table width: 1800mm
Distance between aluminum track:1100mm
Vacuum pump: 11KW x 2set, 5.5KW x 2set. (Water should be exhausted in case of frozen)
Vacuum degree:0 -0.09 Mpa
Water pump power and qty: 5.5kw ,1.5 kw 1 set for each

YFD300 Vacuum calibration table

Calibration tanks and basin are made of stainless steel
Table length: 6000mm.
Table width: 1800mm
Distance between aluminum track:1100mm
Vacuum pump: 11KW x 2set, 5.5KW x 2set. (Water should be exhausted in case of frozen)
Vacuum degree:0 -0.09 Mpa
Water pump power and qty: 5.5kw ,1.5 kw 1 set for each

300 Haul-off Unit

Quantity of caterpillar: 2 lines.

Haul-off motor:4KW x 2 sets
imported inverter
Length of haul-off caterpillar: 2400mm;

Effective length ofCaterpillar:2000mm

Rubber block:400x45X35
Effective width of caterpillar: 400mm x 2
Haul-off speed:0.5~2.0 m/min

Application : YF series production line is designed for extrusion of PVC plastic window and door's and cross-section cable
pipes,aluminum-plastic composite profiles and etc.PVC profiles are widely used in the building industry,home and officedecoration.
Properties and advantages: This line features stable Plasticization, high output,low sheering force,long life service andother advantages. The production line consists of control system, conical twin screw extruder or parallel twin screwextruder,extrusion die, calibration unit,haul off unit, film covering machine and stacker. The extruder is equipped withalternating-current inverter (ABB or Eurotherm drive), imported temperature controller (RKC,Japan). The calibration unit's pumpand haul off unit's reducer are famous brand products. After simple changing of the die and screw, it also can produce the foamprofiles.

Two step WPC profile machine introduction

Two-step way is that the wood-plastic composite materials complete in different equipments of mixing, from play, extruding products, mixing the raw material in a certain formula, forming wood-plastic particles in the middle, and then squeezing out products.

And nowadays, the two-step way is used currently, application of a wider general use dual-cone-or two-extruder extruder granulation, and then double-cone or single screw extruder extrusion products,mainly used in floor indoor or outdoor, parapets, tray, such as PE plastic extrusion products. Because of the advantages: simple operation, lower requests to the overall technological level and to the matching mold and extrusion equipment than the one-step, and also smaller investment on equipment relatively.

WPC/WOOD pvc door frame production line

WPC profile compounding machine

This pelletizing machine is composed by a parallel twin-screw extruder and the correspondingly pelletizing downstream equipment, it is suitable for the pelletizing of PVC, PE raw material with wood powder or other additives. The pellets produced by this machine is evenly, solid, elegance.

The palletizing downstram equipment is collected by, air transferring unit. This palletizing downstream equipment has the features of high automation and high production efficiency

As the vice unit of CPMIA, Shanghai Jwell Machinery Co., Ltd is the biggest manufacturer of plastic extrusion
machinery and chemical fiber spinning equipment in China, its head office is located in thewestern district of
Shanghai. There are 5production bases, which were located in the western districtof Shanghai, Zhoushan of
Zhejiang Province, Suzhou of Jiangsuand Changzhou of Jiangsu ,Dongguan of Guangdong ,totally covering
700,000 square meters. It has more than 2600 staffs, about 400 technicians and managing staffs.
Main products: various plastic pipes extrusion lines including large diameter PE/PVC double wall corrugated
pipe extrusion line, large diameter PE/PVC solid wall pipe extrusion line, PP-R/PEX/PE-RT cool/hot water pipe
extrusion line, PA/PE/PVC single wall corrugated pipe extrusion line; various plastic profile extrusion lines;
various plastic plate &sheet extrusion lines; chemical fiber spinning; microcomputer controlled automatic blow
molding machines; plastic auxiliary recycling lines; various single &twin screw and barrel extruders;
T die; screen exchangers; Rollers and Robots.
Pioneering Efforts, Unity and Struggle
Consistent quality, Brands Building.Cutting edge technology,Added value products
Capable of ultimate one stop solution



A1: Yes,We own5 manufacturing bases and sales center in Shanghai ,Suzhou ,Changzhou, Zhou Shan, DongguanChina.
Jwell made the first Chinese screw and barrel in 1978 in brand name Jinhailuo.After more than 40years development,
JWELL isone of the biggestextrusion machine supplier in China with 300design&test engineer, 3000 employees.
Jwell has become the premier supplier of extrusion lines and reliable business partners.Welcome to drop in us.
A2:Jwell Machinery owns more than 20 subsidiaries, China famous brand JINHAILUO, JWELL, BKWELL, DYUN
are ourTrade Marks.
A3: Yes,we can provide bespoke service to customers with specific requirements. You can send the detailed
requirements by email. We will check if we can develop them. We develop new machinery every month, and
some of them may not yet be updated on our website.
A4:Our machines taking the European standards and follow the Germany type of business, we cooperation with
International famous brands Siemens Schneider Flender Omron ABB WEG Falk Fuji etc.Our company continuously
imports over 1000 international first-class high precision processing equipment such as multistage machining centers, CNC lathes and CNC milling machines from Korea, Japan etc.All our processes strictly adhere to CE certification,
IS09001 and 2008 quality management system .And we have 12 months quality warranty time. We testing the
machine performances before each delivery. Jwell service engineers will always be here for anything you needed.
A5:once clear your requirements and determined extrusion line is ideal for you. We will send technical solutions and
Proforma Invoice to you. You can pay via TT bank transfer, LC as you like.
A6:Please don't send the payment and double check with us before arrange payment (Bank details will be listed in
every piece of proforma invoice. )We are only responsible for email"".
A7: Usually it takes about1-4 months depends on different machineryupon receipt of order advance payment.
A8:One. We provide both customized extrusion lines and technical solutions. Welcome contact with us for technical
innovation or improvements for your future purchasing plan.
Q9: What is your production capacity?
A9: We produce more than 2000 advanced extrusion lines every year world wide.
Q10: We can send the small spare parts by air express for urgent matter. And the complete production line by sea
to save the cost. You can either use your own assigned shipping agent or our cooperative forwarder. The nearest
port is China Shanghai, Ningbo port, which is convenient for maritime transportation..
A11: Yes, we support ourbusinesspartnersby pre-after sale service.Jwell has more than 300 technical testing
engineers traveling world wide.Any caseswould be responded withprompt solutions.We provide training, testing,
operation and maintenance service for alife time.
A12: Yes, your business is safe and your money is safe.If you check China company blacklist, you will see that it is
not contain our name as we never crook our customer before.Please click "send" and Contact us !!
Shanghai Jwell Machinery Co., Ltd.
Add:Changzhou, Suzhou, Dongguan, Zhoushan, Shanghai ofChina.
Contact:Ms. Megan Jwell 0086-13818591226
Web:www.jwell.cn
PVC pipes and electrical wire duct and casing making/extrusion/production machine