PVDF 0.1um Filter Cartridge for Pure Water

PVDF 0.1um Filter Cartridge for Pure Water:
Customized good chemical stability PVDF rod/tube/gasket/sheet
APPLICATION:

1)Filtration for pure water

2)Filtration for aggressive or oxidizing solutions

3)Finefiltrationforprintingink

Description

PVDF owns excellent chemical resistance, aging resistance, processing performance, dimensional stability, fatigue
resistance and creep resistance. Compared with PTFE, PVDF shows a higher rigidity and pressure resistance when
compared with PTFE, and high toughness at low temperature, but the smoothness and electrical insulation properties is lower. PVDF continuous using temperature range -30-150 °C.
Characteristic
1. High rigidity and high strength
2. Toughness, wear resistance, excellent creep resistance
3. Excellent chemical stability, good corrosion resistance
4.Anti-aging properties, anti-ultraviolet
5. Good mechanical performance, easy welding, thermoforming and other machining
6. Insulation resistance, high dielectric strength, low flammability
Application
1. The best materials for petrochemical equipment, fluid handling systems as a whole or lined pumps, valves, piping, tanks and heat exchangers.
2. To meet the requirements of anti-corrosion and fire-retardant, widely used in the semiconductor industry on high-purity chemical storage and delivery devices.
3. Other pump parts, rotary disc, valve, stop valve, extraction centrifuge, cog wheel, pipe connections, slide, etc.
PVDF rodDiameter(mm)length(mm)720082001220015400204002170237025200267035704270507055706270707071.57085329060953216050PVDF Tube:Outter diameter(mm)inner diameter(mm)length (mm)22107321990341670381870438704323504718324816704817704828705087050287059357060257062237062387064387065307067357070870705070864870966370118837011810070134987013711070148138701501101001551377016514770165807019317670194129552006060PVDF gasket:Outter diameter(mm)inner diameter(mm)thickness(mm)16.212.423026242028454692606987261055861077661127661299815134947148120161531186160972016412471821387.5200160621016662121727268222727521218280457318271732829253643077378350174283727PVDF sheet:length(mm)width(mm)thickness (mm)33241580503080801.5106552510670.54519535625025054004005Using ConditionsSuitable for following applications:

Drinking water production (raw water as tap water, ground water, surface water, etc.),

Reuse of sewage (filtration of secondary effluent),

Pretreatment for RO membrane process (seawater desalination, wastewater reuse, industrial water production),

Reuse of industrial wastewater (waste water standard: SS<30ppm, COD<120ppm, BOD5<30ppm);

2. pH range: 3-10 (2-12 when doing cleaning);

3. Max. feed water turbidity: 15NTU;

4. Max. feed water pressure: 0.30MPa;

5. Pretreatment filter mesh size: smaller than 500 micron meter;

6. Oil concentration in raw water must be less than 2mg/L, otherwise it must be removed by pretreatment;

7. Design pure water flux:1.5-5.0 m3/h;

8. Max. TMP (trans-membrane pressure): 0.15MPa (chemical cleaning is needed when TMP is more than 0.12MPa.);

9. Operating temperature range:5-45°C;

10. Max. free chlorine concentration in cleaning solution:1000 mg/L;

11. Operation type: cross flow or full flow.