Perforated MGO Acoustic Panel for Ceiling / Wall Panel

Perforated MgO Acoustic PanelThis productisusedhighqualitymagnesiumcementasitssubstratematerial,and thenpaintemulsionpaintofacrylicacidonthe surface,andbackside is covered withhighqualityanti-dustcloth.
Products data:base boardModified magnesium cement board(mgo board)Surface PaintEmulsion paint of acrylic acidSize1220*2440*(3-9)mmHole Aperture3mm, 6mm, 8mm optionalHole TypeE: LinearRoundHole/ V: Rhombic Round Holehole center distance16mm, 32mmBending Strength15MPADensity0.9-1.1g/cm3Water absorbing rate15%Fireproof gradeA1Thermal resistance1.14m2k/wRadioactivityNot limited to the scope of applicationSafety100% does not include harmful substances,such as asbestos and etc.
Main characteristics
Soundproof
Fireproof
Dampproof
Durable
Easy installation and maintenance
Do not contain asbestosModel
V32/3E16/6
Rhombic Round Hole Linear Round Hole
hole center distance:32mmHole center distance:16mm
Hole Aperture:3mmHole Aperture:3mm
Applications:It can be used in computer lab, subway,cinema,broadcast station, TV station, spinning mill,factory, gym and other large public places.
Methods of installmentMaterials and tools
-special putty seams
-light steel keel and accessories
-self-tapping screws
-a special set of tools for perforated panels
-scraper
-rubber roller
Perforated mgo panel is installed on the light steel keel which is the same as ordinary mgoboard
1. In order to maintain a complete pattern, the overall layout should be considered before installation. The layout of lights, air-conditioning output port, inspection port should try to avoid the perforation area.
2. The space of vice or vertical keels is advised to be 400mm or 600mm, and also make sure the smoothness.
3. For the convenience of installation, we recommend using the self-tapping screws and ensure there is no bumped place. Keep a less than 20CM linear layout in the edge of screws, and perforated area should be slightly strengthened.
4. The sound-absorbing cotton should be put on the backside of the panel. Please note that the aluminium foil should be peeled off rockwool to ensure that no gas barrier.
Note of installing:
Before install a panel, use auxiliary tools to determine the position of the adjacent panels. Pull the straight lines and diagonal lines to ensure all the holes are in the same line.