Physical Pressure Therapy Apparatus for Edema

Physical Pressure Therapy Apparatus For EdemaMCL-6000Product DescriptionWhat isfeature of ourPhysical Pressure Therapy Apparatus For Edema?

Packaging & Delivery

Packaging Details
medical temperature controller applies corrugated paper boxes. It should be stored indoor of room temperature, dry, non-corrosive gas and well-ventilated after packing. Avoid violent vibration, rain, and direct sunlight. Don't place upside down.
100pcs in one box :475*490*1120mm
Lead TimeQuantity(Sets)1 - 1>1Est. Time(days)10To be negotiated

Clinical Applications

Widely used in physically cooling patients of encephalitis, brain edema, cerebral hemorrhage, traumatic brain injuries, cranial hypertension, cardiopulmonary resuscitation (CPR), febrile convulsion, central high fever, especially for craniocerebral injury and Hypothermia treatment for preoperative and postoperative, intracranial hemorrhage, quinsy and so on. Hypothermia therapy can improve survival rate effectively of patients who are banned to using medicines.

Working Principles

The imported compressor provides cold source, using fluorine-free environmental refrigerants, after secondary special water cycle circulation system and control system, contacting patient body with cooling blanket and cap, controlling temperature by temperature differences

Structure:

Twoway output, double temperaturecontrol, equipped with a cooling blanket anda cooling cap, they can be used at the same time.

Temperature Control Range

-4°C~40°C available to adjust, cooling speed is no less than 2°C/min.

Blanket Surface Temperature

The temperature of cooling blanket or cooling cap is ±1°Caround water temperature. Surface temperature unevenness is no more than 2 °C

1. Strictly enforce the standard of YY 0833-2011 limb compression physiotherapy equipment. This standard is the national compulsory standard; Therefore, the product is more perfect in structure, performance, safety and effectiveness.

2. ABS engineering plastic appearance with strong Corrosion resistance.

3. Dynamic display shows Real-time working status and time, with intuitive understanding of treatment process.

4. Equipped with emergency stop switch, which is safe and practical.

5. Overpressure alarm: inflation pressure exceeds 30 kPa, automatic alarm, and stop work.

6. under voltage alarm: inflation pressure is lower than the setting pressure, automatic alarm and stop work.

7. End alarm: automatic alarm after end of the treatment.

8. Pressure of chamber can be manually set at any time to achieve best therapeutic effect. Any chambers can also be adjusted to 0 kpa to avoid pressure such as surgery parts.

ProutnamePressure wound therapy apparatusModelMCL - 6000Environmenttemperature5°C-40°CRelativehumidity30%-85%

Atmospheric pressure

86.0KPa-106.0KPa

Power supply

AC220V±22V,50Hz±1Hz

Pressure range

IPC-6000A portable type has 7 fixed gears: 5 kPa,7 kPa,10 kPa,12 kPa,15 kPa,20 kPa and 25 kPa.

Limitpressure

The limit pressure of airbag should be less than 30kpa

Working noise

≤50dB.