Plasticgeocell honeycomb gravel retainer Geocell
DZAS HDPE geocell is three dimensional, honeycomb like structures manufactured from high density polyethylene and jointly welded by ultrasonic technics .
It is flexible to fold during the transport and installation on construction site.
The geocell nets will be filled with soils,granular, cements or other on-site infill materials when stretched into web structures, which has powerful and rigid confinement in the lateral and vertical sides.
Note:When you are ready to inquire for hdpe geocell,pls specify your requirement as follows:
1.Geocell Height:50mm to 200mm.
2.Welding Distance:330mm to 1000mm.
3.Tensile strength of welding strength:100N/cm,120N/cm,140N/cm,142N/cm.
4.HDPE Sheet Thickness:1.1mm,1.2mm,1.5mm,1.75mm.
Plastic AS-HJ geocell honeycomb gravel retainer Geocell
Plastic AS-HJ geocell honeycomb gravel retainer Geocell
The difference between flat surface geocell and textured surface geocell:
The textured geocell has higher friction coefficient with gravel or other filling materials ,enhancing its stability.
Geocell Specifications
Product Type
Height(mm)
Welding Distance(mm)
Thickness
(mm)
Tensile Strength of Welding Points(N/cm)
Tensile Strength of Connection of Cells(N/cm)
Tensile Strength at Yield of Each Sheet(Mpa)
Smooth and Not Perforated
50≤H≤250
330≤A≤1000
1.0~1.4
≥100
≥120
≥20
Smooth and Perforated
50≤H≤250
330≤A≤1000
1.0~1.4
≥100
≥120
≥20
Texturedand Not Perforated
50≤H≤250
330≤A≤1000
1.5~1.7
≥100
≥120
≥20
Textured and Perforated
50≤H≤250
330≤A≤1000
1.5~1.7
≥100
≥120
≥20
Remarks:
1. This is a basic technical specification.
2. All of the technical indexes can be reached according to the customers' demand, and the other special standards will be carried out by agreement or contact.