Plastic Welding Machine for PVC, PP, PE, PVDF

Main Features1)PA66 for welder body, plastic resist 280°C;
2)Japanese bearing and thermal insulation gasket;
3)Swedish Kanthal heating wire;
4)Ceramic material resist 1650°C;
5)Airflow is 230L/min, max temperature is 650°C.
6)230v 1600w Plastic Welder with Accessories for SaleTECHNICAL data:ZX1600ZX34001.Power cordVoltage(V) :42 100 120 200 230 For 50/60HzVoltage(V) :200 230 For 50/60Hz2.Main switch 3.Screw on the clampPower consumption(W) :960 1400 1600Power consumption(W) :34004.Potentionmeter for temperature adjustmentWeight (kg) :1.3 with 3m cordWeight (kg) :1.4 with 3m cord5.Handle & NozzleTemerature :20-700 degrees Celsius,infinitely controlled6.Air fillterAir flow (1/min) :Max.2307.Rubber standAir pressure (pa) :3000 (30mbar)after about 24 h operating time8.Adapter tubeSize (mm):Customized9.Heat protection tube
Application:Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.Package:
Certificates:
Customer visiting:
FAQ: