Pneumatic Actuator 3 Way Flange Ball Valve

sanitary pneumatic ball valve,ball valve price
Product DescriptionSize15-600 (mm)MaterialStainless Steel 304 or 316Pressure16MPaConnectendFemale threadedThreadendsANSIB1.20.1(NPT),DIN259/2999,ISO228-1,BSP,BSPTBody&CapInvestmentCasingTestAPI598,100%testedunderwaterandgasCertificatesISO9001 ,API andCECertificationMediaWater,oil,gas,acid,steam,ectApplicabletemperature-192ºC~540ºCInspectiontestingAccordingtoAPI-598,EN12266 Pressure-control valves are found in virtually every hydraulic system, and they assist in a variety of functions, from keeping system pressures safely below a desired upper limit to maintaining a set pressure in part of a circuit. Types include relief, reducing, sequence, counterbalance, and unloading. All of these are normally closed valves, except for reducing valves, which are normally open. For most of these valves, a restriction is necessary to produce the required pressure control. One exception is the externally piloted unloading valve, which depends on an external signal for its actuation.We will give you areply within 24 hours after receiving your inquiry.Pneumatic Actuator

1,Indicator

Position indicator with NAMUR is convenient for mounting accessories such as Limit Switch box, positioner and so on.

2,Pinion

The pinion is high-precision and integrative,made form nickelled-alloy steel, full conform to the latest standards of ISO5211,DIN3337,NAMUR. The dimensions can be customized and the stainless steel is available.

3,Actuator Body

According to the different requirements, the extruded aluminum alloy ASTM6005
Body can be treated with hard anodized, powder polyester painted ( different
colours is available such as blue, orange, yellow etc.),PTFE or Nickel plated.

4,End caps

Die-casting aluminum powder polyester painted in different colours, PTFE or Nickel plated.

5,Pistons

The twin rack pistons are made form Die-casting aluminum treated with Hard anodized or made form Cast steel with galvanization. Symmetric mounting position, long cycle life and fast operation, reversing rotation by simply inverting the pistons.

6,Travel adjustment

The tow independent external travel stop adjustment bolts can adjust±5°at both open and close directions easily and precisely.

7,High performance springs

Preloaded coating springs are made form the high quality material for resistant to corrosion and longer service life, which can be denounced safelyand conveniently to satisfy different requirements of torque by changing quantity of springs.

8,Bearings & Guides

Made form low friction, long-life compound material, to avoid the direct contact between metals. The maintenance and replacement are easy and convenient.

9,O-rings

NBR rubber O-rings provide trouble-free operation at standard temperature ranges.For high and low temperature applications Viton or Silicone.

Operating conditions1.Operating mediaDry or lubricated air, or the non-corrosive gasesThe maximum particle diameter must less than 30μm2.Air supply pressureThe minimum supply pressure is 2.5 BarThe maximum supply pressure is 8 Bar3.Operating temperatureStandard:-20°C~+80°CLow temperature:-35°C~+80°CHigh temperature:-15°C~+150°C4.Travel adjustmentHave adjustment range of ±5°for the rotation at 0°and 90°5.ApplicationEither indoor or outdoorWe will give you a reply within 24 hours after receiving your inquiry

Packing &Delivery:
Delivery Details :3-5 working day for sample, 2-7 working day for small products, 15-30 working day for mass products.Packaging Details:shrink wrapped -carton -plywood case or according to customers' requirement.
Usually we ship your order by sea or by air...
We'll tell you the tracking number once your order has been sentWe accept T/T Bank transfer, L/C, Western Union, Moneygram, PaypalFAQ:

1. Are you afactory or the trading company?
Q:We are manufacturing factory and we have the export licensed2. Do you have any guarantee on the quality of your valves?
Q:Quality assurance for more than one year3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.4.Which port are you shipping?
Q:Ningbo or Shanghai Port5.Can we print the LOGO on products?
Yes, and we support the OEM.6.Do you have any certification?
Q:Yes, we have 12patents for the products.7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,andour factory has been inspected by SGS .8.Can Iget some samples?
Q:Yes .Free samples will be sent to you by express mail9.May Ivisit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you.