Polyolefin Heat Shrinking Wire Identification Sleeving

Polyolefin Heat Shrinking Wire Identification SleevingModel Number: SB-DIN-M
Working temperature: -40ºC~+125ºCStructure
Oil resistant heat shrink marker sleeve is developed environment-friendly flame retardant heat shrinkable tube, using specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.Usage
SB-DIN-M markers are widely used in military industry, aerospace and marine.Characteristics
MaterialThe sleeving shall be fabricated from irradiated, thermally stabilized and flame retarded modified polyolefin compoundcontaining no halogens or cadmium in the formulation.Application rangeIndustrial environment;Rail & mass transit; Aerospace & defense; Marine;Operating temperature range-40ºC---+125ºCMinimum recovery temperature+85ºCMaximum storage temperature+50ºCShrink ratio2:1, 3:1ComponentsHalogen-freeColorWhite, Yellow, other color is available if orderedPrinting modeSingle sided printing and Double sided printing formats availableSupplied modeEither Continuous type or Ladder format type is availableRecommended PrintersThermal transfer printer
Specification: shrink ratio 2:1 ModelNumberAs Supplied (mm)After Recovery(mm)ID(D)Flatten Width(w)Double Wall ThicknessID(d)Single Wall ThicknessDIN-M-2X-1.6-50-2.5K2.00±0.203.7±0.30.48±0.10≤0.790.45±0.06DIN-M-2X-2.4-50-2.5K2.79±0.205.0±0.30.48±0.10≤1.180.49±0.06DIN-M-2X-3.2-50-2.0K3.64±0.236.3±0.40.48±0.10≤1.590.51±0.06DIN-M-2X-4.8-50-2.0K5.26±0.258.9±0.40.49±0.10≤2.360.54±0.06DIN-M-2X-6.4-50-1.5K6.92±0.2811.5±0.40.50±0.10≤3.180.56±0.06DIN-M-2X-9.5-50-1.0K10.2±0.3216.7±0.50.51±0.11≤4.750.59±0.06DIN-M-2X-12.7-50-1.0K13.5±0.3621.8±0.60.52±0.11≤6.350.60±0.07DIN-M-2X-19-50-0.5K20.1±0.4032.2±0.60.53±0.11≤9.530.62±0.07DIN-M-2X-25-50-0.5K26.7±0.4542.5±0.70.55±0.12≤12.70.63±0.07DIN-M-2X-38-50-0.5K39.8±0.5163.2±0.80.57±0.12≤19.10.64±0.07DIN-M-2X-51-50-0.25K53.0±0.5683.9±0.90.58±0.13≤25.40.64±0.08DIN-M-2X-76-50-0.25K79.4±0.56125.3±1.00.59±0.13≤38.10.64±0.09
Specification: shrink ratio 3:1 Part NumberAs Supplied (mm)After Recovery(mm)ID(D)Flatten Width(w)Double Wall ThicknessID(d)Single Wall ThicknessDIN-M-3X-1.6-50-2.5K2.00±0.203.7±0.30.47±0.10≤0.530.52±0.06DIN-M-3X-2.4-50-2.5K2.79±0.205.0±0.30.47±0.10≤0.790.57±0.06DIN-M-3X-3.2-50-2.0K3.64±0.236.3±0.40.48±0.10≤1.060.61±0.06DIN-M-3X-4.8-50-2.0K5.26±0.258.9±0.40.49±0.10≤1.590.67±0.06DIN-M-3X-6.4-50-1.5K6.92±0.2811.5±0.40.50±0.10≤2.360.71±0.06DIN-M-3X-9.5-50-1.0K10.2±0.3216.7±0.50.52±0.11≤3.180.77±0.06DIN-M-3X-12.7-50-1.0K13.5±0.3621.8±0.60.53±0.11≤4.750.80±0.07DIN-M-3X-19-50-0.5K20.1±0.4032.2±0.60.55±0.11≤6.350.84±0.07DIN-M-3X-25-50-0.5K26.7±0.4542.5±0.70.56±0.12≤8.470.86±0.07DIN-M-3X-38-50-0. 5K39.8±0.5163.2±0.80.57±0.12≤12.90.89±0.07DIN-M-3X-51-50-0.25K53.0±0.5683.9±0.90.57±0.13≤17.20.90±0.08DIN-M-3X-76-50-0.25K79.4±0.56125.3±1.00.57±0.13≤25.80.92±0.09
Color: Standard color is white and yellow (other color available upon request).