Powdered Coffee Grading Sieves MachineIt allows for high capacity wet or dry scalping in a compact, low headroom design. Single motors mounted on sides of the body, allow unrestricted flow of material and create the 3-D motion that allows oversize material full discharged, keeping the screen clear for maximum product flow. Its low headroom requirements and straight flow design, allow it fit easily into existing product lines without reworking the entire system.Technical parametersModelPowerEffective screening diameterLargest vibration forceLayerZP6000.18kw550mm3000N1ZP8000.18kw760mm3000N1ZP10000.25kw930mm5000N1ZP12000.37kw1130mm8000N1
The Grading Sieves Machine is mainly used for
1. Size classification: separation of particles into groups of comparable size from the materials
2. Gravity filtering: removal of solids from liquids and slurries
3. Product reclamation: removal of the solids from waste product or clarification of waste liquid for further use
4. Screening: separation of a few oversize particles from a quantity of materials
5. Liquid cleaning: cleaning of wastewater or removing the solids from recalculating liquidWorking principle ofgrading sieve machine
The model is suspended on rugged springs that allow it to vibrate freely while minimizing power consumption and preventing vibration transmission to the floor. The flow patterns of material can be fine turned for screening efficiency by repositioning the bottom eccentric weight relative to the top eccentric weight.Matters needing attention
1. once the machine on operation, vibration part shall not be connected or contact with any object.
2. When feeding materials, pay attention to ensure the uniform feeding.
3. When the material through down, keeping no big impact to damage the screen.
4. Before operation and power off, there should no be any material on screen surface.
5. If there is any abnormal sound in the operation, the machine should be shutdown immediately and to check.
6. Ensure vibration motor maintenance regularly.Tell us your requirements for getting right grading sieve machine
1. Name of the processing material and its characteristic
2. Capacity per hour you asked
3. Your aim: separate material into different size, remove impurities in powder or liquid, others
4. How many layers you asked and the sieve mesh for each layer
5. Working situation: voltage, Hertz, Phase