Prestressed Multi-Holes Anchor Steel Wire End Anchorage

Prestressed Multi-Holes Anchor Steel Wire End Anchorage Description:
The post tension anchor(M15, M13 BM15, BM13 flat anchor, anchor, anchor ring HM), fixed end anchorage (H, P), the connector and the corrugated tube.
Prestressed Multi-Holes Anchor Steel Wire End Anchorage Usage:
Highway bridge, railway bridge, City Interchange, city rail, high-rise building, water conservancy and hydropower dam, port anchorage
Rock slope anchorage pier, foundation reinforcement, the tunnel roof top Multi-Holes Anchorage, prestressed grid, subway, large buildings, warehouse building, tower building, weight lifting, intermittent push push synovial, tunnel, and large container ships, sleeper, bridge support replacement, bridges and buildings reinforcement, reinforcement engineering, and corrosion engineering (antimagnetic fiber), carbon fiber reinforcement, anchor pretensioned beam construction, prestressed cable engineering, in vitro, suspension.
Prestressed Multi-Holes Anchor Steel Wire End Anchorage Parameters:
According to the diameter of PC strand can be divided into YM12.7, YM13, YM18 type anchorage, the anchoring system is mainly applicable to the strength of 1860MPA-2000Mpa and below the level of 12.7mm, 12.9mm, 15.24mm, 15.7mm, and 17.8mm as the standard strength of steel strand of 5mm-7mm high strength steel beam 1670Mpa. Wide range of options, YM is suitable for design of tension anchor system between 0-12000KN, the number of steel strand range is 55;
post tension anchorIncluding the M series steel wire tension and anchor system: M13 (anchorage for 12.7-12.9mm steel strand and anchorage (M15) used in 15.2-15.7mm steel wire) with YCW series Jack and ZB4-500 type electric pump for tension; for flat structure BM13 and BM15 flat anchorage for cyclic stress; the structure of the HM13 and HM15 ring anchor.
Welcome to send inquiry,Thanks