Professional Powder Coating for Brake Pads
1.Generalintroduction:We have focused on the professional powder coating for brake pads for more than 10 years.And we havecooperated with many largemanufacturers.2.Productseries:
We Provide high light (above 86%), plain glass(76-85%), matt (20-50%) and low
light (below 20%) of the full-color powder coatings products.Gloss can also be
controlled according to the user's requirements.3.Packing:Carton packaging, lined with double polyethylene bag, net weight 20 kg.
4.Storage requirements:Store below 30 °C, ventilated, dry, clean room, not near thefire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powdercan be stable for 12 months, more than the storage period may be re-examined,such as the results meet the requirements, can still be used.
5.Powder physical properties:
Proportion : 1.1-1.8 (depending on the color and gloss )
Particle size distribution: 100% less than 125 microns(more than 85% between60-90).
Liquidity:18~35mm.
Curing conditions:180°C,15minutes.6.Averagecoverage:8-10/kg,themembraneis60μm (calculateby100%utilizationrateofpowdercoating).7.Healthandsafety:Thisproductisnon-toxic.
Inthecourseofinhalationofdustshouldbeavoided.Theoperatorsshouldwearappropriatedustmaskandglasses.8.Coatingperformance
CoatingperformanceTestitemsInspectionstandardsTestindicatorsHighlightGlazed/Matte/LowlightImpactresistanceISO6272GB/T1732-199350kg/cm40kg/cmCuppingtestISO1520GB/T9753-19888mm7mmTheadhesion(gridmethod)ISO2409GB/T9286-19980BendingISO1519GB/T6742-19862mm3mmPencilHardnessASTMD3363GB/T6739-19961H-2HSaltspraytestISO7253GB/T1771-1991>500hoursDampheattestISO6270GB/T1740-1979>1000hoursHeatresistance110°C/24hours(white)Goodglossretention,E≤0.3-0.4FloridaweatheringexposureISO2810South45°,12monsGlossretention≥50%Artificialacceleratedaging60°C/8hours+50°C/4hourscondensing,cyclefor500hoursGlossretention≥50%Colorstability:E≤0.35Annotate:1.Theaboveexperimentuses0.8mmsteelwithdegreasingandrusting,andthecoatingthicknessare50-70microns.2.Theabovecoatingperformancemaybelowerasshinyandslightlylower.
9.Whychooseourproducts?1).Wehaveourownfactory.Thegoodqualityandthecompetitiveistheadvantageofourcompany.
2).Thematerialwechooseisalwaysgoodandproductsalwayscomeoutwithhighquality.
3).Atrialorderorsampleordersarewelcomed.
4).OurproductsareexportedtoEurope,America,SoutheastAsia,andothercountriesandregionsintheworld.
5).Wewilldoourbesttoserviceyouallthetimeifyouhavethefurtherquestion.10.MSDS for powder coating.
11.Wehaveourownfactory, 8 production lines and a complete set of testing equipment.
12.We will arrange for SGS testing at regular intervals. In order to confirm our products meet the environmental standards.
13.We do many certifications to confirm every parts meet the national standard.
14. We have exported to many countries, and getting unanimous praise. Also many customers visitedour company.