Profile PTFE High Pressure Radial Shaft Tg4/M16 Seal Ring

Product Description

Composed of a filled PTFE friction ring and an O'Ring, which guarantees pre-tightening, the "roto-seals" allow a reliable and durable radial sealing. These radial seals have a very low friction coefficient, which ensures long-term optimal sealing.

Furthermore, the "roto-seals" that are resistant to very high pressures (approximately 30 MPa), can withstand sharp increases in temperature, and are completely protected from the stick-slip" effect.

Description
Morgan EO swiveling seals are single or double acting piston rotary seals composed of a filled PTFE grooved friction ring and a pre-tightened rubber O-ring. It is generally used together with guide rings.
Design Standard
The design and apply refers to the GS56140-GS56145 series of B+L, TG4 series of Trelleborg, M16 series of Merkel, OQ series of Parker, YRB series of AS.
Advantages
Low friction coefficient; no stick-slip effect on startup
Excellent abrasion and extrusion resistance
The grooves provide an integrated lubrication system
Excellent dimensional stabilityTechnical dataTemperature-30°C/+200°CPressure30 MPaSpeed2 m/sMediasMineral hydraulic oils
Fire-resistant liquids
Biocompatible fluids
Water
Others (contact our experts)Applications
Rotary hydraulic transmission exists in industries such as engineering machinery, construction machinery and mobile devices. It seals the rod, shaft, pin, rotary distributors, hydraulic motors and rotary joints which make rotating or swinging motion. Double acting rotary seal, can undergo pressure from both sides or alternating pressure. Installed in grooves of ISO 7425 standard. Single acting structure of higher rotating speed.
Materials
Friction ring
Bronze-filled PTFE
Carbon-filled PTFE
Virgin PTFE
O-ring
NBR 70 Shore A
FKM 70 Shore AExtrusion gapsRadial section
SRadial extrusion gap
F/210 MPa20 MPa30 MPa2.450.150.100.053.750.200.150.105.500.250.200.157.750.300.250.2010.500.300.250.2014.000.450.300.25Surface roughnessRoughnessDynamic surface areaStatic surface areaRa0.05 - 0.2 µm≤ 1.6 µmRz0.4 - 1.6 µm≤ 10.0 µmRmax0.63 - 2.5 µm≤ 16.0 µmChamfers and radiusRadial section
SRadius
R1Radius
R2Chamfer
C2.450.200.402.003.750.200.602.505.500.201.003.507.750.201.305.0010.500.201.806.5014.000.202.507.50Installation dimensionsBore diameter
ØD1 H9Groove diameterGroove widthRadial sectionO'Ring
cross-sectionNumber
of groovesBECA 843
Standard
seriesBECA 841
Heavy-duty
seriesØd1 h9L1 0/+0.20SØd28.0 - 39.9---D1 - 4.902.202.451.78140.0 - 79.914.0 - 39.9D1 - 7.503.203.752.62180.0 - 132.940.0 - 79.9D1 - 11.004.205.503.532133.0 - 329.980.0 - 132.9D1 - 15.506.307.755.332330.0 - 669.9133.0 - 329.9D1 - 21.008.1010.506.992670.0 - 999.9330.0 - 669.9D1 - 28.009.5014.008.402For special applications > 20 MPa, we recommend using an H8/f8 tolerance (bore/groove) or selecting other more suitable materials. Please contact our experts.