Program Controlled Auto 800 Chamber Filter Press

Filter plate are made of strengthened PP & TEP through mold pressing, high in strength, light in weight, corrosion resisted, non-poisonous and odorless;Advantages:Simple in operation, convenient in maintenance, it adopts hydraulic pressing system, with manual plate shifting method, Air pressing or water pressing can be selected for squeezing filter plate with pressure 1.0~1.6 Mpa, this process is designed for reducing moisture content in cake and increase solid rate by 8%-35%.The production of programme comprises a comprehensive range of options:Filter presses
1.Chamber filter presses
Pressure generated in the feed pump supports suspension in the the filter chambers.
2.Membrane filter presses
Suspension in the filter chambers is supported with only limited pressure.Ultimate dewatering is achieved through pressurization of the membranes.
3.frame filter presses
The same procedure is applied as for the chamber filter press.The filter chambers are formed by the frame plates used.Versions
1.Filter plate formates from 470mm to 2000mm
2.small,medium and large side-bar filter presses
3.Mobile filter presses
4.Filtration pessure up to 25 bar
5.Operation:manual,semi-automatic,fully automatic.Modules
1.Close/open filter press lock manully or electro-hydraulically
2.Fully automatic plate transportation with accident prevention
3.PP/steel/stainless steel drip plate,manual or hydraulic
4.cake washing,pressure and washing plates
5.New-generation PLC controls with remote maintenance module
6.filter cloth acidification
7.Fully automatic filter cloth cleaning
8.Drip-tight filter plate packages
9.Two-sided filling
10.Explosion-protection design.Specification as follows: