Qj542 Nl-3A Connector Accessory Anti-Pinch Switch Auto Connector

Product Specifications1,Rating: DC 3.0A 14VMinimum:1V DC 10mA2,Operating temperature range: -40~+95°CItemsTesting ConditionsPerformance Requirement3.SizeVernier caliper, micrometer, projectorFit the designing sizes4.AppearanceUnder the normal line of sight strength and color, maintain the normal line of sight and suitable light, use 10X microscope.The base with no deformation, miniature, injection molding lines and other adverse, pin without deformation, burr, crush, stain, no oxidation, coating, shedding, spots, scratch and any other defect.5.
Insulation resistanceInput the testing DC 500V maintained for 30S, the measured minimum should be larger than 20MΩ.Testing measures as follows:
(1). Between adjacent pins.
(2). Between insulating material and any pins.200M6.Insulation voltageTest voltage of AC1000V(50HZ) between insulating materialand pins or adjacent pins for 1min.No inrush current, breakdown, arcing, mechanical damage and any other defects.7.Contact resistanceContact resistance of each contact pair of the connector<20mΩ.8.Pin thickness after coatingTake three points on the pin coating surface.
Coating material: coating with tin, copper or nickel base.basement 2~3um,surface 3~4 um.9.Solder abilitysolder to atemperature of 255±5°C, dip tin for 3±0.5S.
Dip soldering area of pin should be more than 95%10.DurabilityThe retention force between pin and base should be larger than 30N.No divorce11.High temperature testTest in 120ºC for 1008HIn conformity with the 4and 7items after testing12.Random vibrationIn three mutually perpendicular directions, operating 2h in each direction,Vibration frequency(10-1000)HZ,10-80HZ,0.75mm;>81-500HZ,20g;>50-1000HZ,18g). Appearance; no deformation, no looseness contacting, contact resistance≤10 mΩ,Continuity>500 Ω/100ms.In conformity with the 4and 7items after testing13.Corrosion resistanceUse 5%Nacl(PH6.5-7.2) /35±2ºC/duration 48HSurface corrosion<5%14.Temperature cycleCycle in -40ºC to 100ºC for more than 40 times. Stay in each temperature limit for 20min. Switching time of temperature limit shall be less than 30min. After test, place under room temperature for 4hours before re-measurement.In conformity with the 3to 7items after testingFAQ:
Q: Are you trading company or manufacturer?
A: We are manufacturer.
Q: Do you have the products in stock!
A: It depends on the specifications and quantity you want.
Q: How about your lead time?
A: Generally it is 7-10 days if the goods are in stock, or 15-25 days if the goods are not in stock. It depends on order quantity.
Q: Do you accept customized products?
A: Yes, we can provide customized products, please send us your drawing and all the requirements to proceed the project.
Q: Can Imix different models in one container?
A: Yes, models can be mixed in one container?
Q: How can Iget asample?
A: Please send us your drawing and specification, then we will arrange the sample, the freight charges will on your side.
Q: What is your payment term?
A: T/T is available.
Q: How do you deliver the goods?
A: Goods can be delivered by air express or by sea; International Express as FEDEX, UPS, DHL, TNT, etc. You can choose the way as you want.