Quickly Dry 726 Gp Construction Adhesive Glass Silicone Sealant

Visbella® General purpose silicone sealant is a low modulus, elastic joint, one-component, cost effective, silicone sealant and formulated for trades/tradesman, domestics and decoration usages. Visbella Silicone Sealant is temperature-resistant property contributes to its waterproof and airtight characteristics even under such serious temperature condition as-40°C-+140°C. It is weather resisting and antiaging properties will not be degraded under the influence of rain, snow, or longtime being illuminated by ultraviolet ray.
Product AttributeDescriptionSpecificationAppearance:Fine PasteSpecific Gravity:1.03gm/mlExtrusion Rate (3.2 mm (1/8") orifice, 90 psi air pressure) g/minute:476Sagging ( mm ):0Flow Rate (sag or slump):NilStretching Bonding:NilTensile Modulus at 25°C (77°F) and 50% R.H:0.46Tack-Free Time at 25°C (77°F) and 50% R.H. :5-10 minCure Rate at 25°C(77°F) at 50% R.H. in 24 hour(mm):2.6Hardness Shore A, points:28
Application
1.Used for all general purpose sealing and bonding;
2. Install and fix all kinds of window and door;
3. For architectural decoration, glass, aluminum, wood, brick, ceramic, etc;
4. Sealing and bonding other non-greese products.
5. Widely used in glass industry, aluminum industry, plastic industry, etc. ray.Advantage & Features
General purpose & stable quality
Good adhesion to many materials such as glass,stone,marble,granite curtain-wall,ceramic,metals etc.
Good characteristics of room-temp curing and fast strong bonding
Excellent weather resistant performance, water proof
UV resistant, moisture resistant,excellent aging resistant
No corrosive to metals, marble,ceramics,concrete,stone and glazing glass etc.

How to Use
1.Make sure surfaces are clean and dry. Remove any soap, oil and grease.
2.Cut tip off cartridge, screw on nozzle. cut nozzle to desired opening at 45 angle.
3.For a smooth seal hold at 45 angle and apply bu pushing sealant ahead of nozzle.
4.If further caulking is required, complete within 5 mins, remove excess sealant immediately with dry paper towel cured plug.

Production LineCompany Overview

Zhejiang Guoneng Technology Co., Ltd was establish from 1992. Over 20 years professional manufacture experience, we become one ofthe largest Manufacture on Adhesive in Huzhou City Zhejiang China.Our company covers an area of 22,000 square meters, including 800 square meters of laboratory and we have over 200 employees.We specialize in the production and distribution of adhesive products,and they're well approved by SGS, Reach, RoHs, BSCI,ISO9001:2000 etc. OEM and ODM are both welcomed.

We'd like to cooperate with customers from all over the world based on mutual-benefit. We always put "Customers First" in our mind and commit ourselves to providing high quality HPPP (Honest, prompt, Precise,Professional) service to all reliable and esteemed international partners and clients.

Certificates
After-SalesService

Replywithin24Hours

Professionalconsultationserviceisavailablewithin24hoursafterreceivingyourfeedbackregardingtheiterms
thatthatyoubought.

GlobalInsuranceService

Globalinsuranceserviceguaranteesthesafetyofitermswheninstallationandapplication.

CompensationPolicy

Anyqualityproblemcausedbyourcompanysidewithenoughevidence,wepromiseyouthatifcouldbere-producedforfree.

Contactus,youwillgetmorethanwhatyousee !