Reasonable Price Poultry Ventilation Evaporative Cooling Pad/Wet Pad

Greenhouse Cooling Pad Abstract

1. It is made from special paper with honeycomb structure. There are two types of wave heights: 5mm and 7mm, and the corrugation is 45° x45° Interweaving. Adopt new-generation polymers and space crosslink technology for high water absorption, high water proof, mildew-resistance and long service life.

2. The evaporation area is bigger than the surface, with cooling efficiency above 80%.3. This product contains no surface active agents, absorbing water naturally, diffusingat high speed, with lasting effectiveness. Adrop of water is completely diffused within 4-5seconds, which is exceed the national specification standards. The height of natural water absorption is 60~70mm/5min; 200mm/hour, which is fully up to international industrial standards.4. It contains no phenol or such chemical substances which are easy to cause skin allergies. It is non-toxic, harmless, green, safe, energy-saving, environmental protection,economical and applicable.

Cooling pad system is the new type cooling system which is produced by our company for energy saving cooling equipment. Simple structure ,large quantity of cold air, low price, low power consumption, fresh air and reliability service, It can be widely used in the textile, socks, clothing, glass injection molding ,rubber ,painting, silk screening, toys, electronic ,home appliances, footwear, printing, foot processing, dyeing and laundry, where have the hot workshop. As well as the shopping mall, the super market, waiting room and large indoor entertainment.

Description of China Greenhouse Evaporative Cooling Pad used for decreasing inside temperatureBasic Information
Combined new generation of polymer materials with space crosslinking technology, possessing good characteristics of high water absorption, high water resistance, rapid diffusion, anti-mildew, strong cooling efficiency, long service life and other advantages.Suitable for adjusting indoor humidity.Specification
Three kinds of corrugated specifications: 50/90, 60/90 and 70/90. The optional sizes can be customized according to customer requirements.
Outer frame material: aluminum alloy, galvanized board, stainless steel, plastic steel, plastic frame optional.

Greenhouse Cooling Pad Details:

1)Corrugated paper with the spatial crossing linking technology, high absorbability, high water resistant, anti-mildew and long service life.

2)Large evaporation area, cooling efficiency as high as 80%.

3)The product absorbs water naturally, with fast speed of pervasion and lasting effectiveness. One drop of water can diffuse within 4~5 seconds. The natural absorption height is 60~70mm/5minutes, as 200mm/1.5 hours, having reached international standard.

4)The product does not contain phenol and other chemicals which is irritant to the skin .It is safe, energy saving, environmental protective, economic and durable.

5)Galvanized sheet /aluminum panel/stainless steel optional.Advantages:
High evaporation rate and excellent permeability can ensure that water evenly spread through the whole cooling pad wall. Therefore, cooling efficiency would reach more than 85%.
No surfactant, natural water absorption, rapid diffusion, durable performance.A drop of water can be dispersed in 4~5 seconds.
With high water absorption, the natural water absorption is 60~70mm/5min or 200mm/1.5 hour.
Corrugated paper with special treatment, high structural strength, no deformation, durable.
The specific three-dimensional space structure provides the maximum evaporation surface area for the heat exchange between water and air.
With ventilation and corrosion resistance performance as well as the extremely good filtration function to the air dirt, it is the environmental protection material with characteristics of non-toxic tasteless clean humidification, oxygen inhalation and temperature decreasing, therefore it's also used as the air purification and the filtration medium.
Easy to install, non-toxic and harmless to human body, green, safe, energy saving, environmental protection and economic.

FAQ

1. How long is the delivery time?

According to your ordering quantity, the delivery time is usually 5-20days.

2. How longis the warranty period?

360 days

3. Is your compay foreign trade company or manufacturer?

we are manufacturer.

4. Can you supply sample?

5. Can your company supply installation drawing?

Our company can supply the drawing, but you should send us your building drawing first.

6.How to intall the cooling system?

First you can install by yourself.

If you can't install, we can send engineers to install for you. but you should be responsible for all the cost of installation.

7. When installing, what cost should we pay?

our engineers and workers visas and round-trip tickets, their foods and accommodation, their communication

8. What is the payment terms?

usually the deposit is 30%-50% of total value. Before loading, all the balance shoulde be paid off. Or you can give your own payment terms, then we can negotiate it.

IF you have any questions to ask,please call me at+86-13573673894