Recycling Pyrolysis Plant Continuous Waste Plastic Incinerator for Sale

Recycling Pyrolysis Plant Continuous Waste Plastic For Sale
ProductIntroduction:
ModelYFLF-30YFLF-50YFLF-150YFLF-300YFLF-500Incineration Capacity20-30kg/time, 3-6 times per day30-50kg/time, 3-6 times per day100-150kg/time, 3-6 times per day200-300kg/time, 3-6 times per day300-500kg/time, 3-6 times per dayIncineration Size mm(L*W*H)1450*900*17501800*1150*30002000*1400*35002200*1400*38003000*2000*4800Garbage Entrance Size(mm)480*600620*800760*960900*11001080*1280Chimney Outer Diameter(mm)280280300400460Draft Fan0.37kw0.37kw0.5kw1.1kw1.1kw0.5kwHelp Burner Power(kw)0.110.110.110.220.22Help Burner Fuel consumption(kg/h)4~64~105~127~147~14Reburner Power(kw)0.110.110.110.110.11Reburner Fuel consumption (kg/h)4~64~107~1410~2015~26Operating Voltage380V or 220V380V or 220V380V or 220V380V or 220V380V or 220VWeight about(kg)230040007000800013000
PRODUCT OVERVIEW
The multi-purpose waste incinerator adopts the most advanced one-stage pyrolysis gasification +surround wind co-firing +secondary.incineration +burn-out treatment. The design of the primary combustion chamber of the incinerator uses the gasification incineration.technology to change the temperature inside the furnace of the incinerator from 200. Cto 400. C. The waste does not causeproblems such as frit, slag, and sintering during the incineration process. Compared with the direct combustion furnace and otherfurnaces, the gasification incinerator has very little dust generation, and asecondary incineration burner and acircumferential air.supply device are arranged in the secondary mixing incineration chamber.
At high temperatures, the combustible gas in the flue gas can be fully combusted, and the gas generated by the gasifier can be fullymixed and burned with high efficiency to prevent the carbon material in the gas fliame from escaping and late burning. When the flue.gas enters the high-temperature burnout chamber, the combustion mode is adopted such as tangential entry and tangential entry ofthe combustion-supporting air, so that the flue gas can be fully burned again in the burn-out chamber, and the flue gas is removed bythe swirlinga airflow, and the flue gas is incinerated. The residence time in the furnace is more than 2seconds, so that the combustible.gas in the flue gas and the combustible material in the fly ash are completely incinerated, and the dry exhaust gas purification device.arranged in the upper part of the incinerator, and hydrogen chloride, sulfur oxide, etc. generated in the incineration are generated.The adsorption treatment is performed, and components such as odor in the flue gas are decomposed at ahigh temperature-
The flue gas purification system is provided with acalcium hydroxide filter brick and an acid gas for neutralization reaction. therebyachieving the purpose of adsorbing acid gas and purifying exhaust gas. Reduce harmful components in the flue gas to below the.ational "Hazardous Waste Incineration Pollution Control Standard (GB18484-2001" and other standard values.
PRODUCT FEATURES
1, Suitable for incineration: medical waste, living garbage, industrial waste, animal carcasses, residual limb and animal innards.
2, Incineration calorific value: calorific value of about 2800kcal/Kg
3, Furnace body type: vertical cylinder model
4, Equipment capacity: 30-500 kg/h
5,Ignition way: automatic ignition
6, Manual ash, manual feeding auxiliary fuel: liquefied petroleum gas (low calorific value of 10495 kcal/kg)
7, Furnace pressure, adopts the design of negative pressure doesn't backfire,-3--10 mmh2o column
about Our CompanyQingdao Youfeng Environmental Protection Equipment Co.,Ltd.is aprofessional manufacturer of the environmental protection equipment. We provide one stop solid waste sewage treatment, harmless treatment of dead animals, odor treatment solutions; municipal sludge, meal waste, domestic waste recycling and reuse; multi purpose waste incinerator; buried integrated sewage treatment equipment and various automation, intelligent equipment research and development.
We have already cooperated with many enterprises at home and abroad. For more information, you can check out our website www.youfengep.com.
Factory and CertificatesShipping and Delivery
FAQ :
1.What are the payment terms?
TTorL/C,TT will be more appreciated,30% depositbefore production,70% balance before shipment.
2.What is the delivery time?
You can tell us the name of the destination port and we will check for you.3.How to pack the machine?
Standard packagingfor export.
4. What are our advantages?
Our company has complete qualification,advanced equipment,strong technical force,high quality detection means,perfect stable quality assurance system.Contact UsIf you have any interest in our products, please do not hesitate to contact me.
Maria Lu

Mob.: +86 18682178062