Reschem Fume Cupboard Fume Hood with High Quality

Reschem Fume Cupboard Fume Hood with High QualityTypeBenchtop fume hoodsExhaust systemCAV exhaust system (Constant air volume)Exhaust fanInclined flow fan (The installation principle is the same as air conditioning)Exhaust air rate1500-3500m3/hVentilation ductsPVC material, FPR, PP or otherPower(Single-phase) 220V/50HZ or (Three-phase) 380V/50HZAir valveManual or electricAverage wind speed0.3-0.6m/s adjustalbeNoise level< 60dB(A)Tops12.7/16/19/mm thickness of Phenolic resin (Other: Epoxy resin, Ceramic etc)Inner LinerUsing HPL physiochemical board to make for lining plate and the flow guide plate
Cabinet
1.0mm thick cold-rolled steel with 75μm epoxy resin powder coating, most chemical resistant
Size
1200/1500/1800*850*2350 mm
Visual windows
Transparent tempered glass, explosion-proof (manual)Opening height20-700 mm
Control panel
Touch, intelligent control panel (can control lights, sockets, exhaust fan etc)Gross weight280-400 kgMotor power0.5-1.1KWLuminance>300LXLab accessoriesPegboard, sink, faucet, gas fitting, sockets, lab stools etcSelection of the proper type of fume hood to use in a laboratory should be based upon two interrelated considerations:
1:The hood must allow the user to perform the work in a safe, efficient manner.
2. The need to reduce air conditioning cost. The interior of the Penway`s hood resists the corrosive effects of chemicals. The hood under structure should provide for storage of the required chemicals for the work being done in the hood. The total cost of a hood is greatly affected by its exhaust air requirements. The annual cost of heating and cooling the air exhausted by the hood can be as high as the initial cost of the hood itself.Choosing the proper hood type and sash configuration can significantlyreduce these costs.High Performance Fume HoodsPenway High-Performance/Low-Flow Fume HoodsCompared to most traditional fume hoods, these high performance, low flow hoods are safer, have lower installation costs, and are up to 50% less expensive in operating costs.We have designed and installed fume hoods in labs around the world.High performance fume hoods has a series of design features to provide unsurpassed containment and operator protection:1:Engineered baffle system provides proper air distribution
2:Constant air velocity (variable air volume) reduces energy use relative to sash position
3:Rounded corners at hood entrance reduce turbulence, improving efficiency
4:Aerodynamic sash pull
5:Containment trough with directional vanes and white Plascote finish adds durability and chemical resistance
6:Cord pass-through lets sash fully close without appliance cords getting in the way
7:Lower entrance safety bar provides a personal safety barrier880mm high viewing area
8:White ResChem interior with vapor-proof fluorescent light.
9:458mm vertical opening with keyed sash stop to access 685mm set-up position
10:Double-wall construction for installation of plumbing and electrical service fixtures.
Advantages of High Performance Chemical Fume Hoods:1:Engineered to exhaust 50% less conditioned air from the laboratory
2:Designed to capture fumes while working in today's modern laboratories with varying factors such as lab traffic, fluctuating temperatures and interior hood loading
3:Fume capture and containment can be demonstrated with tracer gas testing
5:Standard, available for all new chemical fume hood installations
6:Quiet operation
7:Low airflow provides an ideal environment for working with powders and delicate work.Low-flow/high-performance hoods use substantially less energy to operate over the lifetime of the fume hood exhaust system. Visit Laboratory Fume Hood Energy Model to calculate your energy needs.Penway has our own HVAC engineers to design the lab fume hood ventilation. From lab ventilation designs to construction, until system test and accept of work. Penwaycan provide one-stop service to customer.