SKF Bearing Grease Lgwa 2/1 High Load, Extreme Pressure, Wide Temperature Range Grease

High load, extreme pressure, wide temperature range grease
SKF LGWA 2 is a premium quality mineral oil based, lithium complex grease with extreme pressure (EP) performance. LGWA 2 is recommended for general industrial and automotive applications, when loads or temperatures exceed the range of general purpose greases.Excellent lubrication at peak temperatures up to 220 °C (430 °F) for short periodsProtection of wheel bearings operating under severe conditionsEffective lubrication in wet conditionsGood water and corrosion resistanceExcellent lubrication under high loads and low speeds

Typical applications:

Wheel bearings in cars, trailers and trucksWashing machinesFan and electric motorsAvailable pack sizesPacksizeDesignation200 g tubeLGWA 2/0.2420 ml cartridgeLGWA 2/0.41 kg canLGWA 2/15 kg canLGWA 2/518 kg pailLGWA 2/1850 kg drumLGWA 2/50180 kg drumLGWA 2/180Gas driven lubricatorsLAGD series60 mlLAGD 60/WA2LAGD series125 mlLAGD 125/WA2Electro-mechanical lubricatorsTLSD series125 mlTLSD 125/WA2TLSD series125 ml refillLGWA 2/SD125TLSD series250 mlTLSD 250/WA2TLSD series250 ml refillLGWA 2/SD250Electro-mechanical lubricant dispensersTLMR 101 series120 ml refill (incl. battery)LGWA 2/MR120BTLMR 201 series120 ml refillLGWA 2/MR120TLMR 101 series380 ml refill (incl. battery)LGWA 2/MR380BTLMR 201 series380 ml refillLGWA 2/MR380Technical dataDesignationLGWA 2/(pack size)DIN 51825 codeKP2N-30NLGI consistency class2ThickenerLithium complexColourAmberbase oil typeMineralOperating temperature range-30 to +140 °C
(-20 to +285 °F)Dropping point DIN ISO 2176>250 °C (>480 °F)base oil viscosity40 °C, mm²/s
100 °C, mm²/s185
15Penetration DIN ISO 213760 strokes, 10-¹ mm
100 000 strokes, 10-¹ mm265-295
+50 max. (325 max.)Mechanical stabilityRoll stability, 50 hrs at 80 °C, 10-¹ mm
V2F test+50 max. change
'M'Corrosion protectionEmcor:- standard ISO 11007
- water washout test0-0
0-0*Water resistanceDIN 51 807/1, 3 hrs at 90 °C1 max.Oil separationDIN 51 817, 7 days at 40 °C, static, %1-5Lubrication abilityR2F, running test B at 120 °CPass at 100 °C (210 °F)Copper corrosionDIN 51 8112 max. at 100 °C (210 °F)EP performanceWear scar DIN 51350/5, 1 400 N, mm
4-ball test, welding load DIN 51350/4, N1,6 max.
2 600 min.* Typical value