SMD LED Self Inspection Bus Route And Destination Display Sign
DescriptionThe old bus destination display is usually failure in use, due to that there might be defective LEDs, bad connect cables, which would cause abnormal displays for LED screen. However, as driver can not get to know the failure immediately, when a bus equipped with bad LED screen runs on the road, it would badly affect the entire urban image and give passengers bad experience.Our new self inspection bus route & destination display board will resolve the problem. It will send timely message to driver's controller & remote admin platform when there's bad LEDs or failure screen.Product Features1. Telecontrol platform accessible, self-inspection when power input, timely send conclusion to driver's controller and platform software;2. Able to inspect one tiny LED, we can also provide custom-tailor alarm level as per individual request.Technical Specs1. Display area, 1700mm*284mm*42mm2. LED colors, Red+Amber3. LED brightness, 1500~2500 mcd / px4. View distance / Angle of reflection, 100 m / 70~110 degree5. Operating volt range: 16~32 V DC6. Power <100 Watts7. 5 levels brightness adjustable8. Functions, route(static) & destination (Static & Scrolling) two layers wording9. Input data format, RS485 or RS232