SWANSOFT STOCK Disposable N95 Surgical Making Machines Face Mask Machine Automatic Only 1 stocks lef

Products Description

This machine is mainly used for automatic forming of N95 mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The whole nose bridge strip is drawn and unrolled. After cutting the length, it is imported into the edge cloth. The two sides are welded by ultrasonic welding.

To the sealing, and then through ultrasonic lateral sealing, through the cutting tool cutting molding; Transfer the mask to two masks through an assembly line.

Ear belt welding station, through ultrasonic welding final mask shape; After the mask is made, it is transported to the flat belt line through the assembly line for collection.

Product Application

Easy for operator, greatly improve production efficiency, only one operator required, frequency conversion speed regulation of the production line to achieve the full automatic production of plane masks, mainly including coil feeding, folding press, bridge rib feeding, mask molding, mask cutting, ear tape feeding and welding, finished product cutting process, complete the whole production process from raw materials to mask finished products. The mask produced has comfortable wear, no pressure, the mask filter effect is good, fit the face shape, can be used in medical, electronic, mining, construction and other industries.

Product Paramenters

Equipment weight

≤2000kg，Ground load≤500KG/sqm

Productivity

15-25Pcs/minute (20,000-40,000pcs/day)

Electric and power

AC220V，50Hz，Approx 9kw

Air pressure

0.5-0.8Mpa 0.038cbm/min

Overall size

14800mm×900mm×2180mm

Use environment

Temperature 10~35℃, humidity 5-35% HR, non-flammable, corrosive gas, dust free (cleanliness not less than 100,000 class)

Product qualify rate

≥99%

Note: Except the incoming materials do not meet the requirements and the improper operation of the staff

Equipment failure rate

≤2%

Note: Failure of the device itself

Product Details

WorkShop Display

Certifications

Our Service

After sales service

After the equipment are arrived at the customer’s site, the customer is responsible for unpacking and arranging the equipment according to the placement drawing; and does under our install-adjust technicians’ guidance. Costs of the staff are decided at last.

2.Training

We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users' technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance.

The buyer can send staff to our company for learning.

3.Quality assurance

We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipment is consonance with the contract.

We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc. that all belong to our responsibility.

The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer’s factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.

4.Warranty

Offer 12 months maintenance period to the problem that caused by our design, manufacture and the material quality, and offer the relevant parts and effective service for free for above reason. We will offer a widely and favorable technical support, after service all the time after guarantee period.