Self-Adhesive Waterproof Bitumen Flashing Tape (RGT-SA-8)

Product DescriptionRGT-SA Self-adhesive bitumen flashing tape with one side bitumen adhesive protected by release film and other side is re-enforced aluminum foil.It is produced with synthetic SBS polymer rubber, good quality asphalt as the base materials without base mat. The upper surface is laminated with aluminum foil, and it has great insulation when exposed to the sun, which offers normal temperature to the base; The lower surface is silicon-coated release film as anti-sticking protection layer that is easy to remove.The product has agood self-adhesive and bending properties. It is asimple yet highly effective solution for waterproofing, sealing and insulation.Materials Consist:base materials: SBS rubber&Asphaltbase mat: Non-feltSurface materials: Aluminum foil&Release filmDimension Size:Thickness: 1.2mm 1.5mm 2.0mmWidth: 50mm 100mm 150mmLength: 10m/roll 15m/roll 20m/rollCustomer's request and design is available, such as:The thickness, width and length can be made the size whatever you want.The surface can be made by PE film PET film or aluminum film;The base mat With polyester mat or glass fiber mesh compound matDouble sides self adhesive can be done.Welcome to send inquiry and order, and we have professional team for your customized.Product Features:· Easy to apply self-adhesive tape. Excellent bond to all common roofing materials.· Self-adhesion without bonding agent, torching, don't need fire, don’ Tneed adhesive glue, or without bonding agent make it safe.· Excellent adhesive property. It can make waterproof layer be awhole body, Excellent adhesive performance guarantees the integrity of waterproof layer.· Good rubber elasticity and elongation, High elongation; Durable and tear resistance. Excellent waterproof and high strength, Corrosion resistance and aging-resistance. High fatigue resistance.·Good low temperature flexible property.Application Scopes:· Roofs -around chimneys and skylights, over joints/ cracks in tiles and roof cladding.· Exterior walls -joints and cracks in asbestos cement sheeting, cracks under masonry ties and anchorages, around wall penetrations (such as water pipes), gutters and down pipes.· Terraces -at joints between terraces and exterior walls, joints in parapets, roof edges, sides, flashing and joints. Inside the house -leaking pipes, showers etc.Instruction to Use:·The surfaces to be sealed must be dry, capable of bearing load and free from grease and dust. Remove all loose dust and dirt with awire brush and soft broom from the area of application.·Unroll and cut Bitumen Aluminium Flashing Tape to the required length.·Peel the backing strip and apply the adhesive side onto the prepared substrate.·Smooth down using aroller or gentle fingertip pressure to prevent air pockets and creases, and to ensure agood tight seal. It is very important to press down the edges and ends of the tape.Note: To improve adhesion in cold weather, store the tape at awarm room temperature before use. The processing temperature should not be below 0°C.