Semi-Automatic Plastic Composite Soft Tube Filling Sealing Machine

Semi-Automatic Plastic Composite Soft Tube Filling Sealing Machine
SpecificationsFilling Sealing Machine1.suit for plastic tube, plastic composite tube fiiling and sealing2.automatic/semi-automaticThe control parts of the machine are composed of intelligent man-computer interface, large touch screen display/operation control panel, including temperature setting, motor speed, filling speed, direct screen display and screen control.The components of the machine which touches the filling material are made of stainless steel SUS304 and SUS316L. Transparent cover, feeding hose, feeding device are also supplied with the machine. The machine is featured with safety switch, auto-stop, soft tube positioning, photoelectric sealing control etc. During the process, hose feeding and setting, filling and sealing, ejecting are all auto matically controlled. Digital count device is installed at the low front part of the machine. During filling process the filling head is put inside the material pot to avoid air-entrance. For high viscosity filling material, blow-off device is installed to ensure a complete sealing. Many choices of sealing type are available to meet different need of clients.
Specification:Production capacity30-90 / minFilling volume5-250ml / branchFilling error≤ ± 0.5%Applicable tube diameter10-50mmApplicable hose length50-200mmMain motor power2.2kwHot air power3kwWorking pressure0.6PMaDimensions2270 * 960 * 2100 ( mm)Weight900kgMain features:1.the following transmission part enclosed in the platform, safe, reliable, non-polluting;
2.filling and sealing parts mounted on the platform above semi-closed static frame viewing hood, easy to observe, easy to operate, easy to maintenance;
3.PLC control, man-machine conversation interface;
4.circuitous dial to cam drive, high speed, high precision;
5.box and Inclined tube position, optionally;
6.curved armrest with a vacuum adsorption unit, handrails and pressure tube device interaction, the hose is fed into the upper tube station;
7.photoelectric standard workstations, high-precision sensor, stepper motor control hose pattern in the correct position;
8.movable injection materials head deep inside the hose injection material, side exit side note, the end of injection material delivery nozzle with integrated manner to ensure filling blow cut quality;
9.no tube no filling;
10.sealing adoption (Leister hot air gun) tail pipe internal heating , cooled by cooling means external configuration;
11.the workstation automatically typing the code number printed on the process requirements of the position;
12.cut plastic robot at a right angle or a rounded end of the hose for selection;
13.fault Baojing, no pipe alarm , the door opened shutdown, overload shutdown;14.counting and quantitative downtime;