Separated Pressure Solar Water Heater

Work Principle

1. The collector absorbs solarenergy and transmits it to the water tank through circulation.2. When the temperature of thecollector reaches the set value, the controller starts the circulation pumpautomatically.3. The circulation pump makesheat-conducting liquid circulate automatically.

4. The heat-conducting liquidtransfers heat to water by lower heat exchanger in the water tank.

5. When the temperature differencebetween solar collector and tank doesn't reach the set value, the circulationpump will be shut automatically

6. In case the temperature of thewater tank does not reach Tmax, Electric Heating Element will start to workautomatically.

Advantage :

1.Module design ,arbitrary combination,harmonize with the building perfectly

2.intelligent control and automatic coperation

3.anti-freeze:using the anti-freezeing liquid as the medium and the controller has the anti -freezeing function.

4:Mulitifuncuin:bathing,washing,domestic heating etc.

5.Work at anytime and enjoyable. 1the pipeline is made of red copper and conducted by heat transfer medium liquid 2with heat pipe:anti-freezeing>-35degrees centigrade 3aluminum alloy out casing&red copper flow passage 4stainless steel inner tank 5solar working station

6.the insulating layer uses import polyurethane bulk bubble and has a good effect of temperature preservation.

7.glass tube:new trivalent element heat tube

8.Temperature preservation is equipped with standard electric water heater setting automatic temperature control exchanger,and increased anode magnesium bars sticking to prevernt furring.

9.water capactiy:150L 200L 250L 300L etc.

10. daily efficicency:>=55%/>42%in winter)

11.heat preservation:72h to 80h 12electic heater:1.5kw to 3kw.