Sewage Aerate Equipment Submersible Jet Aerator

The stainless steel submersible jet aerator is an aeration equipment for water pretreatment andsewage biological treatment. It also can be used to add oxygen for aquaculture and maintain the landscape water. And also can be used to remove Fe,Mn for tap water treatment and supply water to tap water of high building.
Under high pressure which produced by the high speed rotation of the pump impeller, the liquid ejects from nozzle of the aerator at ahigh speed. When the high velocity liquid passes through the mixing chamber, the vacuum is formed in the mixing chamber, and alarge amount of air is inhaled by the intake pipe. After the air enters the mixing chamber, the liquid is drastically mixed with the liquid at the throat, and the air is cut into fine bubbles by water. The gas-liquid mixture is formed and discharged by the diffusion tube. The air rises with tiny bubbles in the water and dissolves oxygen into the water.

The jet aerator can be customized as the usage.It can be welded with one flange,two flange and three flange.And the model no. are as follows.ModelAir Inlet
(m3/h)Diving Depth
(m)Oxygen Capacity
(KgO2/h)Matched pipePump Power
(kw)Pump Flow rate
(m3/h)Pump Lift
(m)Air inlet
(mm)SLB-D-05101-30.38DN500.751010-12Φ40SLB-D-15251-50.85DN501.51513-16Φ50SLB-D-20402-61.5DN502.22513-16Φ50SLB-D-30552-62.65DN50/653.03713-16Φ63SLB-D-40752-63.4DN50/65/804.04013-16Φ75SLB-D-55902-75.2DN80/1005.55013-16Φ75SLB-D-751202-77.5DN80/1007.58013-16Φ751.Domestic Sewage,Industrial Waste Water Treatment,the jet aerator will aerate for the activated sludge treatment method2.Landscape water maintenance.It will be mix oxygen and water to prevent settling down3.Supply oxygen for aquaculture

The installation method depends on the pump type,flange quantity,jet aerator quantity and customer's request.
Please see the below ones just for reference.

Using the polywood carton and paper wraaped.
Transported by air,ocean and others.