Shangchi Addition Type Silicone Impression Material 2 Putty 2 Light Body

Shangchi Addition Type Silicone Impression Material 2 Putty 2 Light body
1. Putty ( Type 0 , one base, one Catalyst) 400g x 2, Spoon x 2
2. Light Body ( Type 3 ) 50ml x 2, MIXPAC Mix head x 6, Oral Tips x 6
We use MIXPAC T-Mixer
3. Application
Silicon Impression Material can be used in stomatology department for clinically oral molding.4. Our products strength:
Using high quality world famous brand raw material, Excellent hydrophilic, better fluidity, More accurate Impression taking, long storage time the initial impression without change.5. Technical Specification:Technical parameters Type 0Type 3 Net curing time, Sec.30/Working time,Sec./150In Mouth time,Sec.210210Consistency,mm≤35≥36Detail appearance μm7520Linear dimension test,%≤1.5≤1.5Compatibility with gypsum test,μm7550Elastic recovery test,%≥96.5≥96.5Strain-in-compression test,%0.8-202.0-20Note: The figure of working time above which is need to be processed under the condition with room temperature(23±2)ºC and Relative Moisture(50±10)%,The rising or dropping of temperature will shorten or extend working time.
6. Operation Method ( Two steps Method)
7. Product Type/Specification:This product has individual packaging and untied packaging, specification as below chart, it can be randomly grouped or solely packed. TypeSpecificationType 0:Putty state
Hand mixing type25gx2/box, 100gx2/box,200gx2/box, 400gx2/box, 500gx2/boxMachine mixing type380ml/picType 3:Light
Hand mixing type10ml/pic x2,50 ml/pic x2, 100ml/pic x2Gun mixing type50ml/picNotice: Product type and specification may changes accordingly, we will inform that when it comes out.
8. Shelf Life:
Two years
9. Storage Condition:
The best storage condition for the impression material is in a cool dry place and sealed for storage.10. Factory Introduction
Dental Materials Factory of Shanghai Medical Instruments Co., Ltd.(formerly Shanghai Dental Materials Factory SDMF)was founded in June 1947, we arethe professional manufacturer of dental materials with the long history also become the subsidiary of Shanghai Pharmaceutical Holding Co., Ltd. (SPH). We were referred asthecradleland of China's dental material industry, the early stage of porcelain teeth and synthetic teeeth; dental bonding agents; dental wax and dental alloy products in China were all come from our factory .With over 70 years of development, the factory currently possesses products of 110 categories and over 3500 specifications under nine series, Including Acrylic and Porcelain teeth, Dental Cement, Dental wax, Denture base resin, Dental alloy, Dental Impression material ect.Nowaday, we are the Leading manufacturerin demostic dental material market, and our brand "Shangchi" is the famous brand been known by most of dentists in China.