Small Grain Wheat Corn Silo Used for Small Farm

5Ton Small Grain Wheat Corn Silos Used For Small Farm

The small silosalso can storage a lot of different grain pellet and powder used in the small farm and small feed factory ,such asfeed soybean,corn ,wheat and others.Low cost, suitable for small farms.

The small silo with the small capacity feed production line, it can be used to store raw materials and reduce the occupancy of raw materials warehouse and reduce the workers cost.

Thestainless steel broiler silo is fabricated by our automatic silo production line, each part applied mold single shot shaping technique, it is wided used as the feed storage and auto feeding in the farms.

The small siloscan not only usesmall farm broiler feed siloin the chicken automatic feed system, but also use in the pig and cattle feeding system.

Such as in the chicken house:

1) Hot galvanized, corrosion resistant
2) Different capacity: 7-20tons
3) To store 2-3 days' feed for chicken of one house

1.Bolts and nuts apply high strenth steel, rubber cap protecting avoid rusted

2.Doule view point convenient to check feed storage level

3.Silo latter aplly skid resisance design, and round surrounding fence for safty

4.Silo upper roof design stainless cap, operator can open and close in the ground

5. Roof designed air circulation pipe to keep silo inside feed fresh

6.Bottom weighing system give accurate feeding volume data for monitoring

7.Hopper angles can be 45° and 60°,among which 60° conical bottom is usually used to store larger pellet and powder materials with high viscosity.

8.The smallhopper bottom steelsilos provide the best quality grain storage option available.Erection of the most popular 5t, 50t and 300t silos is straightforward,and can typically be completed in around10 days per silo.

NO.:ModelParametersCapacity1HN1830-1.01-Diameter 1.83m, One layer, Height 4.16m, Volume 5.32m³,
2- The upper layer and the tower body are 1.0mm thick;
3- The lower layer is 1.2mm thick;
4- The colume is 3.0mm thick
5- The thickness of hop dip galvanized ≥275g/m2
6-With ladder and guardrail, stainless steel air-vent3.5 TON2HN1830-2.01-Diameter 1.83m, 2 Layer,Height 5.28m, Volume 8.27m³
2- The upper layer and the tower body are 1.0mm thick;
3- The lower layer is 1.2mm thick;
4- The colume is 3.0mm thick
5- The thickness of hop dip galvanized ≥275g/m2
6- With ladder and guardrail ,stainless steel air-vent5 TON3HN1830-2.51-Diameter 1.83m, 2.5 Layer,Height 5.76m, Volume 9.53m³
2- The upper layer and the tower body are 1.0mm thick;
3- The lower layer is 1.2mm thick;
4- The colume is 3.0mm thick
5- The thickness of hop dip galvanized ≥275g/m2
6- With ladder and guardrail ,stainless steel air-vent6 TON4HN1830-3.51-Diameter 1.83m, 3.5 Layer,Height 6.88m, Volume 12.48 m³
2- The upper layer and the tower body are 1.0mm thick;
3- The lower layer is 1.2mm thick;
4- The colume is 3.0mm thick
5- The thickness of hop dip galvanized ≥275g/m2
6- With ladder and guardrail,stainless steel air-vent8 TON5HN2200-2.01-Diameter 2.2m, 2.5 Layer, Height 6.3m, Volume 14.05 m³
2- The upper layer and the tower body are 1.0mm thick;
3- The lower layer is 1.2mm thick;
4- The colume is 3.0mm thick
5- The thickness of hop dip galvanized ≥275g/m2
6- With ladder and guardrail ,stainless steel air-vent9 TON6HN2750-1.51-Diameter 2.75m, 1.5 Layer, Height 5.46m, Volume 16.52 m³
2- The upper layer and the tower body are 1.0mm thick;
3- The lower layer is 1.2mm thick;
4- The colume is 3.0mm thick
5- The thickness of hop dip galvanized ≥275g/m2
6- With ladder and guardrail ,stainless steel air-vent10 TON7HI5500-4.0

1-Size Ø 5.5 m * 9984 mm, 4 Layers, Volume : 146m³;
2-Inclination of silo top is 25 °, feeding month is Ø 300 mm;
3-The thickness of hop dip galvanized ≥275g/m2(Double side);
4- Thickness of silo body is 1.5mm;
5- The colume is made 1c-3c 2.5mm Q345 stainless steel;
6- With ladder, guradrail , 2 sets stainless steel air-vent

100 TON8HI6400-7.0

1-Size Ø 6.4 m * 12.6 m, 7 Layers, Volume : 270m³;
2-Inclination of silo top is 25 °, feeding month is Ø 300 mm;
3-The thickness of hop dip galvanized ≥275g/m2(Double side);
4- Thickness of silo body is 2.0mm;
5- The colume is made 1c-3c 3.5mm Q345 stainless steel;
6- With ladder, guradrail , 2 sets stainless steel air-vent

200TON9Other

If you need other model and capacity , pls send the message to us.

I will show you our other model.

10-300TON
success case
Customers Visiting

Factory Show

Welcom to visit our fatory !

Our Service

1.We can provide "one-stop purchasing" or "package program" system solutions and owns professional manufacturing equipment as well as a full range of technical support and after-sale service.

2. OEM, Customized can be all accepted.

3. Contact us any time when you feel free.

Package Show

FAQ

Q: Canyourmachinebecustomized ?

A: Yes, we are a professional manufacturer specilized in palletizing robot, packaging machine, conveyor etc. for more than 10 years and we have a strong design&technical team. We can design and manufacture as per your requirements.

Q:Howtogetanaccuratequotation?

A: Please provide us the detail of the workpiece such as drawing and dimensions.

Q:What'stheshippingcostfromChinatoyourcountry ?

A: We can send machine to your port by sea or other term you need. Please kindly tell us your nearest port or address with code. We have reliable shipping agent to ensure the safe, convenient and timely delivery.

Q:Paymentterms,MOQ,warranty, Trade Terms

A:Paymentterms:30%downpaymentagainstorderbyT/T,thebalanceof70%to bepaidondelivery.

Minimumorderquantity:1set,FOBShanghai

Deliverytime:about20-30 working daysafterreceiptofformalorderand30%deposit.

Warranty:12monthsfollowingdelivery.Weofferonlineservice24hoursalldaylong,Skype,

Emailetc.Youcancontactusanytime,ifurgently,pleasecallus.

Q:what'sthepackage ?

A:All goods are packed in wooden box

Q:DoyouofferInstallation&debugging?

A:Our engineers are available to service machinery overseas to help customers to solve machine problems.

bag packing machine

packing machine

Q:what'spolicyforguaranteeandbrokenparts ?

A:As for machine products, our company provides 12 months for all mechanical parts with the exception of electrical and electronic parts and those subjects to normal wear and tear. Meanwhile, the guarantee starts from the shipment (B/L date). The guarantee is intended limited to the replacement of the broken part after checking the construction fault. The inspection of the causes of the trouble or the breakdown of the parts is exclusively up to the manufacturing company. All in all, our company can offer you assured products.