Smooth Surface Overlay/Complex Carbide Plate/ Feeder/Hopper/Truck Bed Liner

Smooth Surface Chromium Carbide Overlay /CCO/Complex carbide overlay Plate

The smooth overlay plate was manufactured using advanced fusion bond submerged arc welding technology to apply a highly abrasive resistant chromium carbide on to a steel substrate producing consistent chemistry and micro structure (austenitic) with smooth overlay deposit.

This product is usually referred to as chromium carbide overlay (CCO) plate on the market. The hardfacing overlay is suitable for severe abrasive wear and impact applications. Qingdao HART Industrial Technology Co., Ltd was established in 2003, it had along history of providing innovative wear solution and world class wear products.
The ultimate hardfaced product for your application depends on the material--whether rock, sand, gravel or other substance--striking or sliding along the surface of your wear part. It also depends on the angle and speed of impact as well as the operating temperature.[Technical Specification Of HART-SP-100 ]1. base Material:
ASTM A36(Q235B), ASTM A529A(Q345B), other weldable steel is optional;
base thickness: 3to 12 mm
2. Hardfacing Layer:
Chromium carbon alloy on Fe basis(austenite)
Mean hardness: >58HRC
Layer thickness: 3to 12 mm
3. Welding Processes:
Advanced submerged arc welding
4. Alloy Description:
Austenitic chrome carbide iron(Chromium white iron)
5. Carbide Hardness:
>1500HV
6. Volume Fraction of Carbide:
>30%
7. Chemical Composition:
Carbon: 3-6%
Chromium: 18-34%
*Various alloys to be used depend on different operating condition and applications.overlaymm3446681012Standard plate dimension (mm): 1000x 3000/1200 x 3000backing platemm3466881012Customised alloy specifications, plate sizes and thicknesses are available on request
8. Microstructure:
Composed of ahigh proportion of extremely hard primary M7C3 chromium rich carbides dispersed in aductile eutectic austenite matrix.
Maintains 30% to 50% of primary carbides to provide agood wear resistance and homogenous bonding.9. Typical Applications:
HART-P-100 Plate is widely used in the mining, power generation(Coal), cement, dredging, steel production, waste handling, glass production, and pulp and paper industries. Some specific applications include:INDUSTRYAPPLICATONSMiningChutes, hoppers, liners for truck beds, dozer blades, shovel buckets, dragline buckets, excavatorsCementSeparator guide vanes, discharge cones for clinker storage bins, chutes for sintering ore conveying, outlet ducts for clinker grinding mills, receiving hoppersDredgingDredging pipes and pumps, suction pipelines, pump dischargesSteelDredging pipes and pumps, suction pipelines, pump dischargesPowerCoal handling chutes, coal feeder liners, crusher screen plates, classifier cones, journal liners, silo bunkers
10. Wear properties of HART-P-100 (ASTM G65 and SGS test report)
*ASTM G65 is astandard test measuring sliding abrasion resistance using adry sand/rubber wheel apparatus.HARDBANDING ALLOYASTM G65 -- WEIGHT LOSSHARDNESS (RC)10+10-80.162 g/6000 revs64.710+10-40.183 g/6000 revs63.710+10-20.149 g/6000 revs64.0
11. ServiceSERVICEDEscriptIONCutting1. Can be cut by plasma, laser, water jet, arc gouge, and abrasive saw cutting;
2. Cannot be cut by oxy-fuel.Welding
1. Use 480 MPa (70 ksi) or 560 MPa (80 ksi) consumable to join base metal;
2. After welding, joint should be capped by overlay for wear protection.Machining
1. Not machinable by conventional methods;
2. Can be finished by grinding only;
3. Countersunk holes can be precisely produced by EDM (Electrical Discharge Machining).Forming
1. Commonly formed with overlay to the inside;
2. For pipes with diameters smaller than 0.6m (24"), hardfacing pipe recommended instead of pipes fabricated from hardfacing plate.Drilling
1. When drilling, the distance between two holes should be at least 15mm (5/8''); Otherwise, the partition may not be strong enough and can crack;
2. The minimum diameter of holes should be equal to the thickness of the plates. For thicker plates with atotal thickness over 20mm (3/4''), the minimum diameter should be 1.5 times the thickness of the plate.
12. Testing and quality control
We documented how the product properties are tested in order to make sure the overlay plates fulfil the specified product properties. Including documentation on 3D party's quality system if calibration and testing is performed by 3D party.