Solid Welded Frame IP20 Open Rack Floor Standing Network Cabinet

Wall mountingcabinet
Technical specifications:
1. Solid welded frame, maximum load capacity 60kg
2. The turning angle of front door is above 180 degree;
3. Degree of protection: IP20
4. Top fan and air intake around cabinet help exhaust hot-air
5. Quick released side panel with lock
6. Cable entry in top and bottom
7. Surface finish: The degreasing, pickling, phosphoric, powder coated;
8. Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
9. Color: black or other colors available
Compliance:
ANSI/EIA; RS-310-D; IEC297-2; DIN41491:PART1; DIN41494:PART7; GB/T3047.2-92 standard.
Contains:
Front Glass or Steel Door
StandardAccessories: 1or2 Fans on topNo or 1-2 shelves
1 Piece of required standard PDU
30 x Screws
Wall mounting cabinet
Technical specifications:
1.solid welded frame,maximum load capacity 60kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.top fan and air intake around cabinet help exhaust hot-air
5.quick released side panel with lock
6.cable entry in top and bottom
7.Surface finish: The degreasing, pickling, phosphoric, powder coated;
8.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
9.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;
Contains:
Front Glass or Steel Door
Standard Accessories:
1or2Fans on top No or 1-2 shelves
1 Piece of required standard PDU
30 x Screws
Technical specifications:
1.solid welded frame, maximum load capacity 60kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.top fan and air intake around cabinet help exhaust hot-air
5.quick released side panel with lock
6.cable entry in top and bottom
7.Surface finish: The degreasing, pickling, phosphoric, powder coated;
8.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
9.Color: black or other colors available
Compliance:
ANSI/EIA; RS-310-D; IEC297-2; DIN41491:PART1; DIN41494:PART7; GB/T3047.2-92 standard;
Contains:
Front Glass or Steel Door
Standard Accessories: 1 or 2 fans on top
No or 1-2 shelves
1 Piece of required standard PDU
30 x Screws
Wall mounting cabinet
Technical specifications:
1.solid welded frame,maximum load capacity 60kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.top fan and air intake around cabinet help exhaust hot-air
5.quick released side panel with lock
6.cable entry in top and bottom
7.Surface finish: The degreasing, pickling, phosphoric, powder coated;
8.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
9.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;
Contains:
Front Glass or Steel Door
Standard Accessories:
1or2 Fans on top No or 1-2 shelves
1 Piece of required standard PDU
30 x Screws
Wall mounting cabinet
Technical specifications:
1.solid welded frame,maximum load capacity 60kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.top fan and air intake around cabinet help exhaust hot-air
5.quick released side panel with lock
6.cable entry in top and bottom
7.Surface finish: The degreasing, pickling, phosphoric, powder coated;
8.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
9.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;
Contains:
Front Glass or Steel Door
Standard Accessories:
1or2 Fans on top No or 1-2 shelves
1 Piece of required standard PDU
30 x ScrewsWall mounting cabinet
Technical specifications:
1.solid welded frame,maximum load capacity 60kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.top fan and air intake around cabinet help exhaust hot-air
5.quick released side panel with lock
6.cable entry in top and bottom
7.Surface finish: The degreasing, pickling, phosphoric, powder coated;
8.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
9.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;
Contains:
Front Glass or Steel Door
Standard Accessories:
1or2 Fans on top No or 1-2 shelves
1 Piece of required standard PDU
30 x Screws
Wall mounting cabinet
Technical specifications:
1.solid welded frame,maximum load capacity 60kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.top fan and air intake around cabinet help exhaust hot-air
5.quick released side panel with lock
6.cable entry in top and bottom
7.Surface finish: The degreasing, pickling, phosphoric, powder coated;
8.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
9.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;
Contains:
Front Glass or Steel Door
Standard Accessories:
1or2 Fans on top No or 1-2 shelves
1 Piece of required standard PDU
30 x Screws
Wall mounting cabinet
Technical specifications:
1.solid welded frame,maximum load capacity 60kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.top fan and air intake around cabinet help exhaust hot-air
5.quick released side panel with lock
6.cable entry in top and bottom
7.Surface finish: The degreasing, pickling, phosphoric, powder coated;
8.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
9.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;
Contains:
Front Glass or Steel Door
Standard Accessories:
1or2 Fans on top No or 1-2 shelves
1 Piece of required standard PDU
30 x Screws
Wall mounting cabinet
Technical specifications:
1.solid welded frame,maximum load capacity 60kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.top fan and air intake around cabinet help exhaust hot-air
5.quick released side panel with lock
6.cable entry in top and bottom
7.Surface finish: The degreasing, pickling, phosphoric, powder coated;
8.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
9.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;
Contains:
Front Glass or Steel Door
Standard Accessories:
1or2 Fans on top No or 1-2 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
10.Surface finish: The degreasing, pickling, phosphoric, powder coated;
11.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
12.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
10.Surface finish: The degreasing, pickling, phosphoric, powder coated;
11.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
12.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
10.Surface finish: The degreasing, pickling, phosphoric, powder coated;
11.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
12.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standing cabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
10.Surface finish: The degreasing, pickling, phosphoric, powder coated;
11.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
12.Color: black or other colors available
Compliance:
ANSI/EIA; RS-310-D; IEC297-2; DIN41491:PART1; DIN41494:PART7; GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
10.Surface finish: The degreasing, pickling, phosphoric, powder coated;
11.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
12.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
10.Surface finish: The degreasing, pickling, phosphoric, powder coated;
11.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
12.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
10.Surface finish: The degreasing, pickling, phosphoric, powder coated;
11.Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
12.Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
Surface finish: The degreasing, pickling, phosphoric, powder coated;
Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
Surface finish: The degreasing, pickling, phosphoric, powder coated;
Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.Solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.Obtuse angle column design
5.Top installed fan unit and air intake on door and side panel
6.Cable entry in top and base
7.Cable holder inside for convenient cabling
8.Single front and rear door, quick released side panel
9.Doors and side panels open with one key
Surface finish: The degreasing, pickling, phosphoric, powder coated;
Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
Color: black or other colors available
Compliance:
ANSI/EIA; RS-310-D; IEC297-2; DIN41491:PART1; DIN41494:PART7; GB/T3047.2-92 standard;
Contains:
Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.Top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
Surface finish: The degreasing, pickling, phosphoric, powder coated;
Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
Surface finish: The degreasing, pickling, phosphoric, powder coated;
Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Wall mounting cabinet
Technical specifications:
1.solid welded frame,maximum load capacity 60kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.top fan and air intake around cabinet help exhaust hot-air
5.quick released side panel with lock
6.cable entry in top and bottom
Surface finish: The degreasing, pickling, phosphoric, powder coated;
Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;
Wall mounting cabinet
Technical specifications:
solid welded frame,maximum load capacity 60kg
The turning angle of front door is above 180 degree;
Degree of protection: IP20
top fan and air intake around cabinet help exhaust hot-air
quick released side panel with lock
cable entry in top and bottom
Surface finish: The degreasing, pickling, phosphoric, powder coated;
Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;
Contains:
Front Glass or Steel Door
Standard Accessories:
1 or 2 Fans on top No or 1-2 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.able entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
Surface finish: The degreasing, pickling, phosphoric, powder coated;
Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws
Floor standingcabinet
Technical specifications:
1.solid welded main frame maximum load capacity approximated 400kg
2.The turning angle of front door is above 180 degree;
3.Degree of protection: IP20
4.obtuse angle column design
5.top installed fan unit and air intake on door and side panel
6.cable entry in top and base
7.cable holder inside for convenient cabling
8.single front and rear door, quick released side panel
9.doors and side panels open with one key
Surface finish: The degreasing, pickling, phosphoric, powder coated;
Material: SPCC cold rolling steel plate, mounting angle: 2.0mm, others is 1.2mm
Color: black or other colors available
Compliance:
ANSI/EIA;RS-310-D;IEC297-2; DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 stand
Contains:Front Glass Door or Steel door with holes
Standard Accessories:
2 or 4 Fans on top
2 or 4 shelves
1 Piece of required standard PDU
30 x Screws