HX711 Weighing Pressure Sensor Module Big SizeModule main technical parameters:
Our HX711Load Cell Amplifieris a low cost A/D converter module incorporating a very high precision 24 bit ADC and differential high gain inputsthat allows you to easily read load cells,bridge sensors, pressure, strain and weight sensorsto measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell and with some calibration you'll be able to get very accurate weight measurements. This can be used to create your own weight scale, process control, or simple presence detection.based on Avia Semiconductor's patented technology, HX711 is a precision 24-bit analog to-digital converter (ADC) designed for weigh scales and industrial control applications to interface directly with a bridge sensor. The input multiplexer selects either Channel A or B differential input to the low-noise programmable gain amplifier (PGA). Channel A can be programmed with a gain of 128 or 64, corresponding to a full-scale differential input voltage of ±20mV or ±40mV respectively, when a 5V supply is connected to VCC analog power supply pin. Channel B has a fixed gain of 32. An on-chip power supply regulator eliminates the need for an external supply regulator to provide analog power for the ADC and the sensor. There is no programming needed for the internal registers. All controls to the HX711 are through the pins.The HX711 uses a two wire interface (Clock and Data) for communication. Any microcontroller's GPIO pins should work and numerous libraries have been written making it easy to read data from the HX711.Load cells use a four wire wheatstone bridge to connect to the HX711. These are commonly colored RED, BLK, WHT, GRN, and YLW. Each color corresponds to the conventional color coding of load cells:Red (Excitation+ or VCC)Black (Excitation- or GND)White (Amplifier+)Green (Amplifier -)Yellow (Shield)
HX711 Features & Specifications:Two selectable differential input channelsOn-chip active low noise PGA with selectable gain of 32, 64 and 128On-chip power supply regulator for load-cell and ADC analog power supplyOn-chip oscillator requiring no external component with optional external crystalOn-chip power-on resetSimple digital control and serial interface: pin-driven controls, no programming neededSimultaneous 50 and 60Hz supply rejectionCurrent consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uAOperation supply voltage range: 2.6V ~ 5.5VOperation temperature range: -40 ~ +85oCDimensions: 34mm x 21mm x 3mm (1.34in x 0.8in x 0.12in) L x W x HPackage Includes:1XHX711 Weight / Load Cell Pressure Sensor Module 2-channel 24-bit A/DHX711 Installation & Operation documentation
Our advantages:
Factory
OEM supported
Short time delivery
Flexible payment
Aftersale service guarantee
Hardware&software technicians supported
Technician: We treat every piece of our product as our kid.Factory: well trained colleagues, over 200 people.
Sales team: Strong&united sales team Warehouse: Well arrangement makes work happy&effective.
Certificates FAQQ1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.Q2. What is your terms of payment?
A: Full payment. Goods would be shipped in 3-5 work days after payment received, finally depends on quantities.Q3. What is your terms of delivery?
A: EXW.Q4. How about your delivery time?
A: Generally, goods would be shipped in 3-5 work days after payment received, finally depends on order quantities.Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before deliveryFeel free to contact me if you have any question.