Special cleaning spray gun for engine with high pressure car cleaning gun SS-G106
1. The Product Descriptionof Car WashGun:Model : SS-G106The products features novel design, rich foam, fine and uniform bubble, energy-saving and high efficiency
and portability, and is an ideal product for 4S station, automobile wash store, repair surface, automotive
surface, mechanical equipments of factory.With long service life, it is popular in automobile care industry.
2. The Technical Specification of Car WashGun:ModelSS-G106Weight1.80KGLiquid Flew10L/hFlow1-10μmAir Pressure0.4 to 0.8 MpaApplicationClean stubborn stains in corner of the engine and car bodySolutionPH=7Operate TEMP
10-50Spray particle5UM-10UM
3. The Functionof Car WashGun:
Special remove the dirt and duston the surface and in the gap.
4 . The Advantagesof Car WashGun:Reduction by 40% in weight working at low -pressure
Set Up And Tear Down Description:1. Set up the pipe
You only make the pipe push into the relevant joint then it will be got stuck tightly. Please pull it lightly that if the pipe is set
up well.(PIC1)2. Tear down the pipe
First, press down the fastener, then pull out the pipe with another hand.(PIC2)
Note:
You must confirm the pipe if is set up well before using, if not the liquid and air will be reveal to appear danger.
Cleaning Description:
1. Open the liquid contro| value, hold down the trigger, make the dirt emulsify and blow away.
2. Close the liquid control valve, hold down the trigger, make the left water and dirt blow away by airflow.
3. Finally, put the brush into the water for cleaning if it is very dirty.
Warning:
Please confirm that if the joint is set up well before using. if not , it will hurt you , it is very dangerous.
Please stop to use it and back to factory for repair if the tools was damaged or have unusual during using time.
Sino Star car wash guns are packed with exporting standard, tough and safe.
Customer feedbacks & More products from Sino Star: