Special Silicone Structural Adhesive Sealant for Aluminum Panel

basic info:
model no.YL-6600samplefree sampleshelf life9 monthTransport PackageSausageSausage590mloriginChinatrademarkYANGLINhose code35061000.10Bonding MaterialAluminum
product features:1. Single component, neutral, room temperature curing, good adhesion, usually without undercoating. Cured to most building materials, such as glass, aluminum, steel and stone surfaces can produce good adhesion.2. Product solidified to form cold-resistant, heat-resistant, corrosion-free elastomers. With ozone resistance, UV resistance and other super weather resistance.3. It has good compatibility with other silicone adhesive produced by our company.main application:1. All kinds of door and window mounting seams seal2. All kinds of fitting and sealing3. Seams, watertight, for other general industrial applicationsconstruction summary:1. Not applicable to the surface of all exudates of grease, plasticizer or solvent2. It is not suitable for use in confined spaces or for direct contact with the surface of food or drinking water3. The surface temperature of the substrate is less than 4 degrees or more than 40 degrees should not be constructed4. It is not suitable to bond materials containing copper or copper alloy
safety instruction:1. The non-cured structural adhesive and structural adhesive release volatile compounds during the curing process, and the long-term inhalation of high-concentration volatile compounds can be harmful to health. Therefore, the workplace should pay special attention to maintaining good ventilation2.Before the product is cured, avoid contact with the eye. If it is in contact with the eye, rinse with a large amount of water and then ask the doctor to check it.3. After curing, this product will not release harmful substances, nor will it cause damage to the skin.4. Before using this product, users should test the compatibility and adhesion of contact materials, and confirm the conformity before construction operation.
shelf life:Keep the original seal state, the relative humidity is below 50%, the temperature is below 5-27 degrees, and the storage life is 9 months. This product can be transported non-dangerous goods.parametersitemtechnical parameterappearancetransparent or viscous formdynamic viscosity500-650specific gravity1.0-1.15surface dry time(h)10-30shaw hardness(A)30-35elongation at break250-320tensile strongth(mpa)15-25