Stainless Steel Emulsion Tank for Biotechnology

High-speed Emulsion Tank
High-speed emulsion adopts high-speed impeller at the bottom of the mixing device, the production of sugar, milk powder, plastic additives category has a good emulsification effect dissolved. It is the most efficient products in the similar products.The principle: Centrifugal high-speed emulsion in the first hours of work can have an enormous rotating suction, will be at the top of the rotor is rotating with smoking materials, high-speed and then rammed into the stator, through high-speed transfer between the stator shear, collision, smash, the materials together be poured out. At the same time, anti-tank at the end of rotary vortex baffle will force up and down into a somersault, so that the tank evenly mixed materials to prevent the accumulation of liquid in the powder agglomerate, and to achieve hydration emulsion.Uses: Emulsion can use a very wide range of types of cooking oil, the type of flour, sugar, and other raw materials of the mixed emulsion. In particular, apply to certain types of additives such as insoluble gel CMC, xanthan gum, etc.VOLUME
300L
400L
500L
600L
800L
1000L
1500L
2000L
3000
Cylinder diameter
(mm)
Φ800
Φ800
Φ900
Φ1000
Φ1000
Φ1000
Φ1200
Φ1300
Φ1600
cylinder height
(mm)
600
800
800
800
1000
1220
1220
1500
1500
motor
power
(kw)
3
3
4
4
5.5
7.5
7.5
11
15speed of agitator
(RPM)1750r/min
structure
square open on the top
below is a cone