Starter Armature W Shape Wire Making and Shaping Machine

Starter Armature W Shape Wire Making and Shaping Machine
Machine application
W shape wire shaping machine is suitable to make the straight wire to be in W shape before the W shape coils embedded into the armature.It is widely used in the starter armature.
Machine feature
The armature W shape wire making and shaping machine is controlled by PLC controller,. All the data and parameter can be set and edited in the colorful touch screen. It is driven both by pneumatic and mechanism in combination. This wire shaping machine can automatically do wire release, auto straightening, auto enamel removing, auto cutting off in fixed length, auto to make the wire in W shape and auto unloading the finished wire.
Machine Technical dataPower3 phases, 380V+/-10%Frequency50HzAir source pressure0.5-0.7MPaMax wire feeding length350mmWire diameter1.8-2.5mmControl methodPLCOperation methodtouch screenAfter-Sales ServiceOverseas Service Center AvailableCompetitive advantages
Variety of application, easy operation.
We have Overseas Service Center.
Machine is controlled by PLC. All the parameter can be set in the touch screen.
It is suitable for stators with differentmodel number and dimension.
The operation and tooling change process is easy.
We could customize machine for our customer as per their requirement.
We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.
This machine is controlled by PLC. All the parameter could be set on the touch screen,
Information needed for wire shaping mahcine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Wire drawing: including wire diameter
2. Shaped Wire drawing: including wire shaped angle and length
3. Other technical requirement
If possible, it will be better if customer can send us samples.