Sterilization Drying Oven with CE Approved and Factory Price

Sterilization Drying Oven with CE Approved and Factory Price
Desktop dry oven for electronics with CE approved:Use outlined:
The scope of application: The equipment is widely used by biochemistry, chemical pharmaceutical, medical and health, agricultural research, environmental protection and other areas of research and application. As a glass of dry samples and thermal hardening thermal denaturizing experiments, to exclude the residual water samples, micro-organisms using the dry-heat sterilization of glassware, the warm-up before hte heating experiment, heating the food and chemical herding or softening of the experiment, exclude moisture, the extension of food in the harsh conditions of the preservation of time and building materials, electronic components, such as drying and heat drying experiment, banging, disinfection, sterilization and the uses of test materialWorking principle:
The device is the use of high-temperature dry heat is drying to meet the needs of micro-organisms can produce oxidation protein denaturizing, such as electrolyte concentration in a certain period of time to kill residual microorganisms.Features:
1. Automatic cut-off, time is running, calls the restoration, parameter memory , password-protected parameters, the temperature display correction.
2. High heat sensor and in response to environmental scanning micro-processing chips, constitute a high-precision, high temperature characteristics of intelligent.
3. All-round three-dimensional heat, fan forced circulation, high-precision temperature regulation, to ensure that the work of the indoor temperature has a good homogeneity.
4. Built-in temperature calibration, and can regulate the temperature of the small error
5. Temperature deviation from the set temperature, the alarm automatically.
6. Out of control with auto power-off protection heater.
7. With memory function parameters can be set to avoid cumbersome.
8. Led display setting temperature, measured temperature, regular time clearly, each parameter display can be facultative switch.
9. Set the time from 1 to 9999 minutes to any set working hours. From time to time when the end of the window set to close.
10. Stand-off to prevent, and stand-alone over -temperature protection, and sensor fault alarm, over-temperature alarm limit
11. Duct design and reasonable structure, light air circulation design.
12. Mirror stainless steel liner, tempered glass window.
13.Has a modular design of the ceiling temperature tracking, when allowed to deviate from the measured temperature rang the sound the equipment(optical) alarm and automatically cut off the heating.Parameters:
Model
DHG-9000 series
9030A
9030AD
9030(101-0)
9070A
9070AD
9070(101-1)
9140A
9140AD
9140(101-2)
9240A
9240AD
9240(101-3)
Voltage
220v 50HZ
Temp. range
RT+10-250°C
Temp. resolution
0.1°C
Constant volatility
±1°C
Power
870w
1570w
2070w
2470w
Working temp.
5-40°C
Inner dimension(mm)
340*325*325
450*400*450
550*450*550
600*550*750
Size(mm)
625*510*490
740*580*630
830*650*730
880*770*930
Shelves
2pcs
Timing
1-9999 minutes
Model
DHG-9003 series
9023A
9023AD
9053A
9053AD
9123A
9123AD
9203A
9203AD
Voltage
220v 50HZ
Temp. range
RT+10-250°C
Temp. resolution
0.1°C
Constant volatility
±1°C
Power
870w
1120w
2070w
2470w
Working temp.
5-40°C
Inner dimension(mm)
340*325*300
420*400*345
550*450*550
600*600*650
Size(mm)
620*540*490
720*580*530
830*650*730
880*770*825
Shelves
2 pcs
Timing
1-9999minutes
Model
DHG-9005 series
9035A
9035AD
9055A
9055AD
9075A
9075AD
9145A
9145AD
9245A
9245AD
Voltage
220v 50HZ
Temp. range
RT+10-300°C
Temp. resolution
0.1°C
Constant volatility
±1°C
Power
970w
1220w
1670w
2170w
2870w
Working temp.
5-10°C
Inner dimension(mm)
340*325*325
420*400*345
450*400*450
550*450*550
600*550*750
Size(mm)
625*510*490
720*580*530
740*580*630
830*650*730
800*770*930
Shelves
2 pcs
Timing
1-9999 minutesOur company:
Certifications:
Production Line: