Structural Steel Fabrication General Storage Warehouse

Description
Steel Construction includes steel column, steel beam, girder, C/Z purlin, roof bracing, column bracing, tie-bar, roofing sheet, wall sheet, center ridge cap, gutter, trims and flashing, door and windows, and other accessories (ventilation, canopy, translucent sheet, etc. ).
Advantages
1.Prefabricated:Fast and easy installation, save time and labor;
2.Customized design:Different size, various layout, shape and appearance;
3.Light weight:Lighter than concrete;
4.Removable
5.Environmental Friendly:Recyclable, no waste produced;
6.High strength:Can resistance grade 8earthquake, water proof, fire proof, can resist strong wind and heavy snow.
7. Long life span:More than 50 years.
8.Wide span:Single or multiple spans, maximum span 60m without middle columns.Specifications:DescriptionSteel Construction /Pre-Engineered Building StructureMain ComponentsbaseConcrete and steel foundation anchor boltsMain frameHot Rolled or Welded H-Section SteelMaterialQ235B, Q345B or others as per client's requestsPurlinC/Z purlin: Size from C120~C320, Z100~Z320BracingX-type or other type, angle or round pipeBoltPlain or High-strength boltRoof &wallEPS /Rockwool /PU Sandwich panel or colored steel sheetDoorRoller shutter or sliding doorWindowAluminum or PVC windowSurface CoatingAnti-rust Paint or Hot DIP GalvanizeSheet0.3-0.8mm galvanized or color coated steel sheetAccessoriesTranslucent skylight sheet, Ventilators, etc.PVC Down pipe, Galvanized /SS304 gutter, etc.Usages1. Workshop, warehouse, plant, storage2. Steel web frame structure3. High rise building project4. Others steel structure buildingsPackingMain steel frame without packing load in 40' OT or 40'HQRoof and wall panel load in 40' HQDrawingBy client or HonkaeDesign ParametersIf need design from Honkae, please supply following parameters:1) Length, width, eave height, roof apex2) Live Load, Wind Speed, Seismic Load, Snow Load etc.4) Quantity and sizes for doors and windows5) Other information if necessaryProduction Procedure1- Automatic Gas Cutting: Cut steel plates;2- Building Up: Assemble the steel plates;3- Submerged Arc Welding: Weld the steel plates together into the required H-section or tubular shape;4- Rectify: Straighten the welded H-section or tubular member;5- Manual Welding: Weld the stiffener, base plate, top plate, purlin plate etc. Into position;6- Slag Cleaning: Polish the slags by manually according to welding regulation, make the surface smooth;7- Shot Blasting: Sand blast the member to SA2.5 grade;8- Painting/galvanization: Paint or galvanize the member according to requirements.9- Packing and loading: Without packing directly load into container, or packed with steel rack, both are available according to client.
Quality Inspection by client or third party is accepted during the whole procedure.
Services:1. Consultant service and preliminary design, assist client to choose suitable construction plan;2. Quantity Survey, Bill of Quantity, Pricing.3. Construction Manual, Installation and fabrication supervision.4. Warranty after installation completed.