Sulfur All Colors Semi Gloss Epoxy Polyester Hybrid Powder Coating Paint

Sulfur All Colors Semi Gloss Epoxy Polyester Hybrid China Powder Coating
More Detail Information, contact with
As aprofessional Powder Manufacturer in China, we offer effective powder coating solutions for awide range of applications, including automotive, appliance, architectural and general industry market.With our dedicated team, we can help you to improve productivity and reduce overall costs. Our products range from general typeepoxy powder coating,polyester powder coatingandhybrid powder coatingto functional powder coatings .
Main composition
The bulk powder paint is mainly made of epoxy resin,polyester resinand curing agent, leveling agent, pigment, filler and other addictives. it has super chemical resistance and mechanical properties. It can be used in painting those metal products that have special requirement of corrosion resistance, electric insulativity and pliability. Directly outdoor using is not to be suggested.
ApplicationPipeline industry: anti-corrosion pipeline, Oil pipeline, sewage pipe, vessel water pipe, gas pipe and valves etc.metal furniture: Steel furniture, documents cabinets etc.Kitchen utensils: gas cylinder, gas cooker, kitchen ventilator etc.Construction industry: door lock, rebar and steel moulding plateElectrical industry: Electronic spare parts, winding coil, and insulation coating of the rotator etc.
Products series
Available in standard curing and lower temperature curingAvailable in multi-colors, different gloss level such as high gloss ( above 90°), flat gloss( 70-80°), semi gloss ( 10-60°), matt( below 10°), particular color and gloss is made according to customers requirements.Available in various kinds of art textures, such as sandy, wrinkle, lanose grain, hammer tone, metallic effect etc.Physical property
Specific gravity: 1.11.8g/cm3(varied with different color and gloss)
Particle size: average 10~38um, proportion 10~84um > 90%, it can be adjusted if special requirement is put forward to us in advance.
Curing temperature
Standard type: 180oC/15 minutes
Or 160oC/20 minutes, 200oC/10 minutes if customer require
Pre-treatment
The overall quality of the coating system is largely dependent on the type and quality of the pre-treatment. The recommended types of pre-treatment for the most frequently used substrates are:
AluminiumChromate conversionSteelZinc phosphateZinc coated steelZinc phosphate or chromate conversion
Average coating rate
A. Smooth Surface:
6-12/KG, film thickness 60μm (calculated according to 100 consuming of powder coating)
B. Texture Surface:
5-7/KG,film thickness is about 80-120μm
Film performance
Test ItemTest standard and Method
Test indexImpact resistanceGB/T 1732 -1993ISO627250kg·cmAdhension(cross-cut)GB/T 9286 - 1998ISO2409Class 0FlexibilityGB/T 6742-1986ISO15192mmPencil hardnessGB/T 6739-1996ISO28151H-2HCupping testGB/T 9753-1988ISO15206mmSalt spray resistanceGB/T 1771-1991ISO7253>400 HoursHeat & humidity resistanceGB/T 1740-1979ISO6270>500 Hours,film gloss slightly loseNote: 1. Above test are using 0.30mm thickness degreased, rust removed cold rolling steel plate, film thickness is 60-80um.
2. Film performance may slightly decrease with gloss decrease.
Package
Carton packing with liner of double polyethylene bags, Net weight 20kg each.
Storage and shippment
Thebulk powder paint must be stored in ventilated, dry and clean room with temperature below 25oC, Keep it away from fire, heat,and direct sunlight. Outdoor stacking is prohibited. Avoid rains and exposure to sunshine during shipment.
Health and safety
The bulk powder paint isno hazardous ingredients contained. Wearing anti-dust mask and goggles to avoid inhalation of dust. Try best to avoid longtime contact with powder. The coating adhesive to the skin can be washed with soap.
3) Packing information
4 Certificates
5 Quality System
6 . FAQ(1) What powder we can manufacture?
We can do almost all the RAL and PANTONE colors;
We can do almost all the finish powder, like smooth, texture, structure etc.
We can do alot of special powders, like conductive powder, Insulation powder, Soft touch powder, Anti-graffitti powder, Zinc-Rich powder, super thin powder etc.
(2) Our Packing: 25kg /box
Box Size: 38 *27 *33cm (L *W *H)
Pallet size: 1.1 *1.16m Material: Plywood
(3) Our MOQ: Usually 200kg/ color
(4) Delivery Time: Usually send out the goods within 15 days.
(5) Can we get some samples from you?
Yes, we can supply you 1-2 kg powder samples for your testing, but we needyou to pay the freight firstly.
(6) How can we get the quotation?
Please send us your technical data or let us know your requirement as following: Color, Powder Type, Gloss, Surface and other performance requirements