Szg Pharmaceutical and Food Rotary Vacuum Drying/Dryer/Drier/Dry Equipment

Description
Szg Pharmaceutical and Food Rotary Vacuum Drying/Dryer/Drier/Dry Equipmentis a new generation drying device developed by our factory on the basis of combining the technology of similar equipment. It has two connecting ways, i.e. belt or chain. Therefore it is stable in operation. The special design guarantees two shafts realize good concentricity. we also developed SZG. It can carry out steeples speed change and constant temperature control.Principle
As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you. The biggest may be 8000L. Let heat source (for example, low pressure steam or thermal oil or hot water) pass through the sealed jacket. The heat will be transmitted to raw material to be dried through inner shell; Under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously. The purpose of reinforced drying can be realized; The raw material is under vacuum. The drop of steam pressure makes the moisture (solvent) at the surface of raw material reach the state of saturation and evaporate. The solvent will be discharged through vacuum pump and recovered in time. The inner moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be realized within a short time.Features
1.When oil is used to heat, use automatic constant temperature control. Its temperature of operation can be adjusted form 20-160ºC.
2. Compared to other dryer, its heat efficiency will be 2 times higher.The heat is indirect. So the raw material can not be polluted. It is in conformity with the requirement of GMP. It is easy in washing and maintenance.
3. Machine materials : AISISUS304 , AISISUS316L, and other material .
4. The feeding system for this machine can be by manual or screw feeder .
5. For the electrical component , we mainly use international brand such as ABB ,Siemens or Schneider.
6. Smooth running, reliable performance, easy operation.
7. Highly polished inner and outer surfaces of the machine, no dead comer, easy to clear, no cross contamination. Confining to the requirement of GMP.
8. Control system has more choices, such as push button , HMI+PLC and so on.Application
The machine is suitable for vacuum mixing and drying of power and granule raw materials of pharmaceutical industry, chemical industry, foodstuff industry etc. Particularly it is suitable for row materials that have the follow requirements:
1.Themal sensitive raw materials that cannot be dried at high temperature.
2.Raw materials that is easy to oxidize and dangerous.
3.Raw materials that solvent and toxic gases are needed to recover.
4.Raw materials that have special requirement for crystal shape.
5. Raw materials that have special requirement for the content of residual colatile.Options
Product charging by vacuum transfer system
Jacket bowl wall design for heating or coolingType of the vacuum dryerSZG-0.1SZG-0.3SZG-0.5SZG-1SZG-2SZG-3SZG-4SZG-5Volume(L)10030050010002000300040005000Material feed factor0.4-0.60.4-0.60.4-0.60.4-0.60.4-0.60.4-0.60.4-0.60.4-0.6Max material feed weight(kg)50120200400800120016002000Vacuum of the drying machineDg50Dg50Dg50Dg50Dg70Dg100Dg100Dg100Condensed water in the machineG3/4"G3/4"G3/4G1"G1"G1"G1 1/2"G1 1/2"Motor power(kw) for drying1.11.52.235.57.51115Total weight(kg)6501200145028003580595064507300