TM-LED Manual Membrane LED UV Light Source Curing System

TM-LED800 Long Life High Efficient LED UV light Source Curing Machine
Video link:
http:https://v.youku.com/v_show/id_XMTg4NjAyMzk4MA==.html?spm=a2hzp.8253869.0.0&from=y1.7-2&qq-pf-to=pcqq.discussionTechnical parameter:Input voltageAC220-240 - vCooling wayforced water coolingWater-cooled machine size470 mm * 260 mm * 260 mmBelt width 800mm teflonPower1600wSize2*980*1.1mWire and pipe size5 mUV LED band365 nm, 395 nmUV LED light intensity365 nm (1200 mw/cm2-1600 mw/cm2)
395 nm (2800 mw/cm2-3600 mw/cm2)Effective radiation area75 mm * 25 mmWarranty2 years warrantyimport of vertical structure light source: the Taiwan chip, quartz lens encapsulation, 120-200 - w, small size, high power, fast curingTip: We can manufacture according to customer's requirement. We can do any curing width, pls advise the max curing width you need !
Control mode:
A key switch: to control the light output on/off.
Adjustable power set: UV energy using the infinite set arbitrary between 0-100%.
Intelligent protection: intelligent temperature and water flow cut-off alarm protection, temperature alarm value can be set, and water power.
Light is an array of integrated version, 130*130MM LED lamp block, Arranged according to the customer's width AND speed.
Application:
It is apply to the special effects such as wrinkle, frosted refraction gem crystal and convex oil on the bullion paperboard, metal, glass, plastic, and also the UV curing of the offset printing ink on the offset press production.
Features:
1. With Teflon or stainless steel net, transmit speed steady and can be adjusted.
2. With two UV lighting tubes, can turn on the light according to the need.
3. Wink-dry make the surface of the stocks high hardness and rub resistance.
4. Tunneling-based make the whole machine light barrier good and without harm.
5. Equipped with powerful nether induced draughe system and big intake airway, can absorbs the stock on the mesh belthard. It can be used with production line and other equipment easily.
Control mode:
A key switch: to control the light output on/off.
Adjustable power set: UV energy using the infinite set arbitrary between 0-100%.
Intelligent protection: intelligent temperature and water flow cut-off alarm protection, temperature alarm value can be set, and water power.
UV LED light source characteristics:
1. No solvent - the greenhouse effect.
2. Conducive to environmental protection.
3. The work sites and no pollution.
4. Quick production.
5. Room temperature curing.
6. Product has unique properties.
7. To save energy.
8. Easy to wash.
9. Save space.
10. High gloss.
11. Less waste.
12. Method diversity, adaptability, product replacement fast.
While traditional mercury lamp calorific value is big, need special exhaust system, and the curing of heat sensitive material application is restricted.Light intensity on mercury lamp (point or bar) as the center showed a trend of decreasing step by step, uneven illumination, lead to products not consistency, reduce product percent of pass.
UV LED curing machine advantage:
At present most domestic manufacturers still use the traditional UV mercury lamp to work, but will instead of mercury lamp, UV LED because he has too many advantages than traditional mercury lamp!
1, long life: life is a traditional mercury lamp of type of curing machine more than 10 times, about 25000-30000 hours.
2, cold light source, no radiation, according to the product surface of low temperature, heat damage to solve the long existing in optical communication, LCD production problems. Especially suitable for LCD sealing side requiring small temperature, film printing and so on.
3, calorific value is small, can solve the great calorific value of mercury lamp spray equipment and personnel intolerable.
4, instant light, do not need to preheat immediately reached 100% uv output power.
5, life is not affected by the number of open and close.
6, high energy, light output stability, uniform irradiation effect is good, improve production efficiency.
7, can be customized effective radiation area, from 20 mm to 1000 mm in length.
8, do not contain mercury, also won't produce ozone, replacement of traditional light source technology is a safer, more environmentally friendly option.
9, low energy consumption, power consumption is only 10% of the traditional mercury lamp type curing press, can save 90% energy.
10, maintenance cost is almost zero, use UVLED curing equipment to save at least 10000 yuan a year/material fee.
Company Information:
Tamprinter printing machinery group limitedis one of the most professional special printer supplier of Plastic Field in China. We have supplied OEM service for the domestic counterparts since 2005. OEM products have been achieved CE certification.
Due to business expansion, Shenzhen Tamprinter printing machinery limited International trade department have been separated from the parent company in March 2013.
Key products: Pad printer, Screen printer, UV curing machine, Heat transfer machine.Our company's certification and honor.
Welcome to contact us if you have any question!