Textured Surface Geomembrane Type HDPE Liner Price

Textured surface geomembrane type HDPE liner price
HDPE textured liner is manufactured from High Density Polyethylene resins. The surfaces of both sides are Textured .the products are manufactured by the technology of coextrusion-blown triple layer. Excellent physical and mechanical performance, high tearing resistance;good deformation adaptability, high puncture resistance; High aging resistance, high UV resistance, anti-acid & alkali; Excellent low & high temperature resistance, innocuous, long life span; Perfect water proof performance, seepage and humidity resistance.
Excellent Performance:
+UV(ultraviolet radiation resistance)
+improve friction factor
+increase stability
Width:2-8m
Thickness: 0.75-3.0mm
Specification:
Number
Item
Value
1.0mm
1.25mm
1.50mm
2.00mm
2.50mm
3.0mm
1
rough height (mm)
0.25
2
minimum density (g/cm3)
0.939
3
tensile properties
strength at yield (stress) N/mm
5
18
22
29
37
44
strength at break (stress) N/mm
10
13
16
21
26
32
elongation at yield %
12
elongation at break %
100
4
right angle tear resistance(N)
125
156
187
249
311
374
5
puncture resistance (N)
267
333
400
534
667
800
6
environmental stress crack resistance (single incision constant load tensile method)
300
7
carbon black
carbon black content (range) %
2.0-3.0
carbon black dispersion
9 times of 10 viewing area should fall in the level 1 or level 2, level 3 should not belong to more than 1 time
8
size stability %
±2
Product application
1. Environmental protection and environmental sanitation(for example, living landfill yard, sewage treatment plant, power plant adjusting tank, industrial and hospital solid waste, etc.).
2. Water conservancy(for example, anti-seepage, leakage blockage and reinforcement of river, lake and reservoir dikes and banks, anti-seepage of canal, vertical central wall, side slope, etc.).
3. Municipal projects(underground project of subway and structure, anti-seepage of plantation roof and roof garden, lining of sewage pipe, etc.).
4. Landscape garden(man-made lake, river way, cistern, bottom lining and side slope of pool in golf course, waterproof and anti-seepage of greening lawn, etc.).
5. Petrochemical industry(anti-seepage of oil tank of chemical plant, oil refinery and filling station, lining of chemical reaction tank and sedimentation tank, etc.).
6. Mine industry(bottom lining and anti-seepage of washing and selecting tank, piling and soaking tank, ash yard, dissolution tank, pile yard and tailing, etc.).
7. Traffic facilities(reinforcement of road foundation and anti-seepage of subway and culvert).
8. Agriculture(anti-seepage of ditch, channel, reservoir, drinking water tank, pool and irrigation system).
9. Aquiculture industry(lining of intensive and plant type cultivation tank, fish pound and shrimp pool, side slope of sea cucumber ring, etc.).
10. Salt industry(crystal tank of salt field, tarpaulin cover of halogenation tank, salt film, plastic tarpaulin cover of salt tank).
Geomembrane- HDPE GeomembranePart one: Description of HDPE geomembrane HDPE glossy geomembrane is one double-surface membrane with flat and smooth appearance made from virgin resin with special formula.HDPE ordinary rough geomembrane is single-surface or double-surface HDPE geomembrane with uniform and coarse appearance made from virgin resin with special formula.HDPE glossy geomembrane has excellent impermeable and antifouling property and mechanical property; dimensional stability, chemical stability, thermal resistance and aging resistance are good; in the meantime, it also has excellent resistance to UV radiation.HDPE ordinary rough geomembrane has excellent impermeable and antifouling property and mechanical property; dimensional stability, chemical stability, thermal resistance and aging resistance are good; in the meantime, it also has excellent resistance to UV radiation. Its large friction coefficient and skid resistance Is very suitable for pavement of side slopes surrounding refuse landfill and twice pavement of geotextile. In the meantime, it can also enhance bearing capacity and deformation resistance. It is usually used in such project at which surface of membrane of side slope need be covered with earth and large friction coefficient is required. Part Two: The Specification of HDPE geomembrane Thickness is from1.0mm to 3.0mm and breadth is from 4m to 9m. Length shall be designed according to engineering design and clients' requirements.Thickness1.0mm-3.0mmLength50m/roll,100m/roll,150m/roll or as your choiceWidth4.0m-9.0m or as your choiceColorWhite/Black/Blue/Green, mainly blackMaterialHDPEDeliveryportQingdaoPackage:woven bag or as customers' requestsProducttime2-20 daysFeatures1.Good physical and mechanic performance2.High tearing resistance, strong deformation adaptability3.Puncture-resisting, aging resisting, ultra-violet radiation, oil and salt, and corrosion resistance4.Good adaptability to high and low temperature, non-toxicity, long service life5.Good waterproof, drainage, anti-seepage and damp proof effects6.Complete width and thickness specifications, low cost and easy installation.NoteWecandoasyourdemand,pleasefeelfreetocontactusformoreinformationPart Three: The Application of HDPE geomembrane1)Environmental protectionsanitation (such as solid waste landfills, sewage treatment plants, power plants Chi-conditioning, industrial, hospital solid waste, etc.).2)Water(such as rivers, lakes and reservoirs of the anti-dam, plugging, reinforcement of the canal seepage, the vertical wall of the heart, slope protection, etc.).3)Municipal Engineering(subway, on the ground floor of the building, planted roof, the roof garden of anti-seepage, sewage pipes lining, etc.).4)Landscape(man-made lake, river, reservoir, golf courses reservoirs of the substrate, slope protection, green lawn of the waterproof moisture, etc.).5)Petrochemical(chemical plants, oil refineries, gas storage tanks of the anti-chemical reaction tanks, sedimentation tanks of the lining, etc.).6)Mining(washing and pool heap leaching, the ash-field, dissolved, precipitation, the yard, the tailings seepage substrates, etc.).Part Four: Packing &Shipping woven bag or as customers' requestsShipping: 7 days after receive the advance payment
Part Five: Certification
Our products are well sold to various regions in China, and are exported to South Africa, Algeria, Russia, Australia and Israel.
Our company has passed ISO9001:2000 International Quality System Certification, ISO14001:2004 Environment Management System Certification and GB/T28001:2001 Vocational Health and Safety System Certification.
Besides, our company has successfully passed on-site check on production license, and has gained "National Industrial Product Production License" and water-proof qualification.
We have been the member of Chinese Technical Association on Geosynthetics and have been recognized as a "Provincial-level Enterprise Abiding by The Contract, Keeping Promise" for several successive years.
Besides, we were awarded with the titles of "One of Top 10 Famous Brands with Recognized Quality Assurance Standards in China's Plastic Products Industry", "Well-Known Products in China" and "One of Top 10 Enterprises among China's Composite Geomembrane Industry".
We have obtained self-supporting import and export rights.