Thermoplastic Road Marking Powder Paint

BAISC INFORMATION
A. Product Name
Thermoplastic Road Marking Paint
B. Used For
Concrete and asphalt
C. Components
C5 Petropols, EVA, PE wax, titanium dioxide, filler materials
D. Appearance
Powder
E. Standard
JT/T280-2004
F. Color
White and yellow (OEM)
G. Weight
25kg/bag
H.Density
2.01/ cm³
I. Coating Thickness
1.8mm
PHYSICAL CHARACTERISTICS
A. Compression Strength
23.8MPa
B. Fluidity
38
C. Abrasion Resistance
56.8
D. Glass Beads
0%
E. Softening Temperature
104°C
F. Heating Temperature
180-220°C
G. Drying Time After Marking
Touch dry-3 mins
Full dry-10 mins
H. Shelf Life
Up to12 months
I. Storage
Store in a tightly sealed container in a cool & dry place
J. Area Of Line
1 Ton thermoplastic paint can mark about200m2
FEATURES
A. Bright color
B.Good anti-cracking
C. Excellent durability
D. Strong adhesion power
E. High dirty pick-up resistance
F. High coating rate
RECOMMENDATION
A. Equipment
Pre-heater
Thermoplastic road marking machine
Primer sprayer
Road blower
Road sprayer
B. Dosage Ratio
Thermoplastic paint: 1Ton
Primer: 32KG
Glass beads: 100KG
PROCESS
A. Clean
Clean intended application area thorough
B.Layout
Outline the area where the marking will be placed using titanium dioxide
C.Apply primer
Apply the appropriate amount of primer needed for the surface
D.Melt
Heat paint to be melted using pre-heater
E.Position A
Pour melted paint into big container of road marking machine
Position B
Pour glass beads into small container of road marking machine
F. Mark
Mark thermoplastic line using road marking machine
G. Cool
Thermoplastic line will cool within a period of time
ATTENTION
A.Ensure road surface is stable, dry and clean
B.It is better to apply above 0°C
C.Heating paint in the pre-heater should be between 180-220 °C
D.Lift the heating temperature properly when working in a low temperature environment
E.Mixing the melted paint evenly and keeping it warm for 3-5 mins before marking the road
F.Allow primer to dry before applying paint
G.Primer is applied a few wider than the width of the thermoplastic line
H.New asphalt and concrete must be allowed to cure for a minimum of 30 days before applying paint
Company Information
Established in 2008, GZ LUHU TRAFFIC FACILITIES CO., LTD specializes in the the R&D, sales and engineering installation of all kinds of traffic facilities.
Main Products: large-scale traffic safety signs and benchmarks, gantry frames, municipal fences, road safety fences, small signs for parking lots, marking paints, marking equipment, convex mirrors, locators, corner guards, speed bumps, traffic cones, traffic barriers, traffic lights and road studs, etc..
In 2013, it formed an alliance with Zhejiang Brother Guidepost Paint Co., Ltd., and focused on the export of road marking paint and machine.
FAQ
A. Q: What products and services do you supply to me?
A: LUHU supplies all kinds of traffic facilities products, besides, OEM service and after-sale service are provided to enablecustomers getting one-step purchase.
B. Q: How to order from LUHU?
A: Please send us your demand, including:
1. Goods information (Quantity and Specification);
2. Requirement of delivery time;
3. Shipping information (Firm name, Phone number, Address and Destination port)
C. Q: How to get a sample from LUHU?
A: All samples are not free, besides, the freight is also on your side.
D. Q: What payment term do you accept?
A: Normally LUHU does 30% deposit and 70% balanceby T/T, please tell us if you have special need.