Thickener for Disperse Dye Printing

Disperse dye printing thickener RG705200 is a new generation of high efficiency synthetic thickener which was researched and developed by our company. This thickener was widely used in disperse dye printing. It also has a certain advantage in direct printing. Its printing result achieved and better than similar products, can replace sodium alginate. It was easy operation and safety when using.
If use thickener RG - 705200 replace sodium alginate, will make printing factory obtain remarkable economic and social benefits.
Major ingredient:synthetic high polymer
Physical and chemical index:
Appearance:light yellow sticky liquid
Ionicity:Anion
P H Value:6.5-7.5
Solid content:40% min
Application:
1. Can be prepared into paste of 3~5 by water. The method is gradually add quantitative RG705200 to contained water of 1/3 volume of the container, then stir with high speed, then gradually add water to the required stickiness. Or can stir the preparation paste with high speed, then gradually add RG-705200 to the required stickiness.
2,Firstly dissolve the dye into right amount of water evenly, and add enough water according to ratio, then add RG-705RA gradually under high speed stirring, until reach to the required viscosity, use it after filtering.3,Reference Formulation: Disperse Dye 0.5~6.0
RG-705200 2.0~6.0
Water X
Total 100