Thr-Stg3 Stainless Steel Corpse Freezer

In the low power mode, the hash rate of Innosilicon T2T+32T miner is 32Th/s (± 5%), energy consumption is only 2200w (+/- 10%). Meanwhile, the hash rate can break 36T in high performance mode with appropriate temperature and AC cable. The 68W/TH performance is continuing to the lead the pack in the hot contested industry.
INNOSILICON T2Turbo Miner is the new generation BTC mining product. Just as our Terminator 2 (T2), it adopts the state-of-the-art semiconductor technology with the innovative dynamic frequency scaling architecture for added efficiency and reliability.Hashrate:32TH/s (+/-5%)Power Consumption:2200W (+10%, normal mode, at the wall, with 93% efficiency PSU, 25°C temperature )Ambient Temperature:0-40° (device junction temperature)Network Connection:EthernetNote:ASIC Boost feature built in with a proper licensePlease be aware: T2T-32T PSU is inclusive, and the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU does not contain 220V AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.

Below is the work-in-progress Demo of Innosilicon T2T-32T, please enjoy!
Warranty:
All Innosilicon T2T-32T will be tested by factory before shipment and certified by Innosilicon. The post-sales service policy is as follows. After payment, your order will be processed immediately.
180 days parts warranty for any miners directly purchased from Innosilicon (counting upon miner arrival). If any problem, please leave an after-sales message on ourmessage board. Our technical support team will get in touch with you asap.
Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.
The price of miners may be adjusted at any time without prior notice or price compensation to customers.
The warranty expires in the following cases:Miner is demolished, privately altered or component replacement by customers;Lightning, voltage surges, poor quality power supply causing damage;Circuit boards and components damaged by water, exposed to moisture or corroded;The circuit board or the chip is completely burned;Excessive Over-clocking in an overheating environment.
If above case happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.